How to conserve sprinkler car headlights
1 , the choice of sprinkler bulbs: choose the sprinkler bulb is not as expensive as possible, should choose the model for their own models, it is recommended to buy the original bulb from the local chassis service station.
Note: Inferior lamps have safety hazards. Do not use inferior lamps because of a price difference of several tens of dollars.
2. Replacement of the sprinkler bulb: If it is a simple problem such as light bulb burnout, you can repair and replace it by yourself. However, if it is a problem on the line, it is recommended to go to the local chassis after-sales service station for professionals to check and repair.
3 , sprinkler lamps should be regularly checked: such as the appearance of the lamp intact. In addition, the sprinkler should perform light intensity and angle calibration when traveling 20,000 kilometers. If there is indeed a lack of brightness, it is recommended to replace the lamp, it is best to change both the left and right at the same time, so as to avoid the brightness of the two sides are not the same situation. If a large amount of water mist or even water droplets are found in the lampshade, there is a problem with the sealability of the headlight. At this time, it cannot be eliminated by turning on the lamp to heat it, otherwise it may cause irreparable damage.
The machine has two spindles, the work time can be carved with different patterns, and with two different knife to carve what kind of pattern can always switch blade, greatly improves the work efficiency, saves time and labor
XY working area |
1300*2500mm |
Z working area |
200mm |
Working accuracy |
±0.05mm |
Repositioning accuracy |
±0.05mm |
Max. working speed |
25m/min |
Max. traveling speed |
50m/min |
Spindle power |
4.5KW |
Spindle speed |
0-24000r/min |
Max. power consumption(without spindle) |
1,840W |
Working voltage |
AC380V/50HZ |
Control system |
DSP handset |
Drive motor |
Stepper |
Command language |
G-code,*u00,*mmg,*plt |
Machine weight |
1.2t |
Packaging Measure |
3.40m*1.93m*1.45m |
Auto Tool Changer Woodworking Machine
Auto Tool Changer Woodworking Machine,3D Cnc Machine,Cutting Wood Machine,Engraving Cnc Machine
JINAN HT MACHINERY CO.,LTD , http://www.jncncrouter.com