1. The vortex flowmeter pipeline adopts vibration reduction measures. The sensor should be avoided as far as possible on the pipe with strong vibration, especially lateral vibration. If it is necessary to install, vibration damping measures must be taken. Pipe fastening devices are installed at the upstream and downstream 2D ​​of the sensor, and anti-vibration pads are added. 2. The vortex flowmeter reasonably selects the installation site and environment. Avoid strong power equipment, high-frequency equipment, strong power switch equipment; avoid the influence of high-temperature heat source and radiation source, avoid strong vibration places and strong corrosive environment, and consider installation and maintenance. 3. The vortex flowmeter is installed on the horizontal pipe, which is the common installation method of the flow sensor. When measuring the gas flow rate, if the measured gas contains a small amount of liquid, the sensor should be installed at a higher point in the pipeline. 4. The vortex flowmeter sensor is mounted on the side of the horizontal pipe. Regardless of the fluid being measured, the sensor can be mounted sideways on a horizontal pipe, especially for superheated steam, saturated steam and cryogenic liquids. If conditions permit side-loading, the temperature of the fluid has less effect on the amplifier. 5. Installation of the vortex flowmeter sensor in the vertical pipe. When measuring gas flow, the sensor can be mounted on a vertical pipe with unlimited flow. If the gas to be measured contains a small amount of liquid, the gas flow should be from bottom to top. When measuring the flow of liquid, the flow direction of the liquid should be from bottom to top: this does not add extra weight to the probe. Expanded metal grating
Flooring
Expanded Metal Grating,Expanded Metal Fence,Industrial Expanded Metal Fence,Walkways Expanded Metal Fence Hebei Fangyu Trade Co., Ltd. , https://www.fangyu-filtermedia.com
Expanded metal gratings have mainly two types: light and heavy type.
Materials for expanded metal gratings:
Aluminum, carbon steel, stainless steel and other metals.
Grating Patterns:
Diamond, triangle, scale hole, etc.
Specification: thickness:0.5mm-8mm
Hole width: 2.5mm-50mm
Hole length: 4.5mm-100mm
Openness: 0.5mm-8mm
Features:
Expanded metal grating offers many advantages over bar grating. It is made of one continuous piece of material yielding a greater strength to weight ratio. There are no welded parts and the surface is naturally skid proof without further processing. The pattern and openings provides a wider range of load capacity gratings to meet your exact requirements giving greater economy to your project.
Expanded metal grating is the most practical and economical way to assure strength, safety, and a non-skid surface, .Expanded metal grating is ideal for use on plant runways, working platforms, and catwalks as it is easily cut into irregular shapes and can be installed quickly by welding or bolting.
This metal grating offers ease of fabrication, economy, strength, safety and are available in carbon steel , stainless steel and aluminum.
Application:
As fences for walkway, tread plates, stair protection:
Walkways
Stairways
Catwalks
Platforms
Concrete reinforcement
