Heat Treated Steel Bar And Tube
HEAT TREATED STEEL BAR AND TUBE
Heat treated steel bar is produced by heating and cooling in different temperature based on the steel grades to improve the steel bar mechanical properties or machinability for various industrial applications. Heat treated steel bar includes annealed steel bars, Normalized Steel Bar, quenched and temper qt steel bar.
Annealed Steel Bar has better ductility and lower hardness, which can be easier to be machined. The annealing processing is usually widely used for steel grade with higher carbon content above 0.5%. However, some low carbon steel also requires to do annealing for special usage such as 20CrMnTi gear steel. For some special material such as 20CrMnTi gear steel and GCr15 such bearing steel, spheroidizing annealing is often required.
Normalized steel bar sometime is also one kind of annealing processing. It mainly changes the grain to remove the impurities in steel and improves the strength and hardness. For some hot rolled steel bars, to keep the basic mechanical properties, normalizing is often used.
Quenching and Tempering, abbreviated as Q&T is a king of processing that strengthen or harden steel bars by heating the materials and then cooling in water, oil or other liquid medium, that rapidly the change from austenite to perlite to get the proper properties for various usage. The quenched & tempered steel bar materials are usually with carbon from 0.30% - 0.60%, it is widely used as merchant bars in components of various machines.
Our advantages on producing heat treated steel bars:
1) Big stocks of hot rolled round bars or wire rods as raw materials
2) Wide range of Cold Drawn Steel Bar sizes: from 10mm to 150mm
3) Different cold drawing medias powder or oil to get different surface
4) Straightening machines to get better straightness up to 0.5mm/m
5) Grinding and polishing machines to get better roughness upto 0.4um
6) Heat treating furnaces to adjust the mechanical properties
7) Full sets of testing equipment to test the sizes, mechanical properties and microstructure.
8) Multiple packages to avoid broken packages and anti-rusty
4140 steel tube,Round Steel Tubing,Heat Treated Steel Tube,Heat Treated Steel Bar And Tube,S355JR steel tube SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdhighstrengthsteelbolts.com
·Since the sliding door is closed to control the safety hazard, the modern recall part imports Kia Ka Wah
Recently, Hyundai Motor (China) Investment Co., Ltd. filed a recall plan to recall the imported Kia Ka Wah Tourer from March 19, 2015 to February 12, 2018, starting from June 15, 2018, for a total of 2339 Car.
In the vehicle within the scope of this recall, the reversing force setting during the sliding door closing control is too large. If the body part of the finger is closed when the door is closed, it may not be automatically reversed, which may cause injury and pose a safety hazard.
Hyundai Motor (China) Investment Co., Ltd. freely upgrades the door control module software for vehicles within the scope of the recall to eliminate potential safety hazards. Stock vehicles will be sold after eliminating defects.