In 2011, the development of the plastics processing industry was a mixed one. The good news is that under the circumstances of a significant global economic downturn, the output, main business income, total profits and taxes, and total profit of enterprises above designated size in China's plastics processing industry have maintained a relatively high rate of growth, indicating that the industry has maintained a good growth trend; The worry is that at the same time of output growth, the growth rate of the main economic indicators of the plastics processing industry is lower than that of the same period of 2010. The profit growth rate has fallen by a large margin, and the industry’s loss ratio has increased. Especially the operating rate of small and medium-sized plastic processing companies has dropped. Some small and medium-sized enterprises Production and management have already fallen into the unenviable predicament. According to data from the National Bureau of Statistics, in 2011, the output of plastic products of enterprises above designated size in the plastics processing industry was 54.743 million tons, an increase of 22.35% over the previous year. From January to November, the main business income of enterprises above designated size in the plastics processing industry was 1,398.77 billion yuan, a year-on-year increase of 27.73%; profits were 73.83 billion yuan, an increase of 29.32% year-on-year; loss-making enterprises were a loss of 4.351 billion yuan, a year-on-year increase of 43.65%. It can thus be seen that although the industry's major economic indicators have all increased by more than 20%, both the loss surface and the loss have increased, and the number of employees has fallen. This fully supports the mixed situation of the plastics processing industry. The downturn in the export market can be seen in the performance of Taizhou, Zhejiang, which is known as the "kingdom of plastics." According to Chen Jiazeng, director of the Office of Zhejiang Taizhou Plastic Industry Association, due to the world economic downturn and the appreciation of the renminbi, the production and export volume of plastic products in Taizhou decreased in 2011, and the decline rate reached about 20%, even more than the outbreak of the financial crisis. After 2008-2009, even worse. In previous years, the Canton Fair Taizhou plastics processing company will generally get back many orders, and companies that participated in the Canton Fair in 2011 generally reflect orders as in previous years. Under pressure, some plastics processing companies in Taizhou had a holiday earlier than the Spring Festival in 2012, and most of the companies that started construction did not have full production. The “internal concerns†are mainly manifested in the fact that the country’s moderately tight monetary policy and severe regulation of the real estate industry have caused plastics processing companies to face a series of difficulties such as difficulties in capital turnover and shrinking market demand. China's plastics processing enterprises are generally small in size, and the country’s shrinking credits have caused some small companies to lack sufficient working capital and production is difficult to sustain. The state's control over the real estate industry has led to a significant decline in the consumption of plastic pipe and plastic profiled materials. According to Chen Hezhong, chairman of Jiangsu Global Engineering Pipes Co., Ltd., from the second half of 2011, the plastic pipe industry experienced severe overcapacity. The fierce market competition, rising labor costs and changes in the exchange rate of RMB further squeezed profits. space. As the first province of plastic products in Guangdong Province, Guangdong Province, the situation in 2011 is not optimistic. According to Fu An, president of the Guangdong Plastics Industry Association, the rising cost is an important reason for squeezing corporate profitability. First, the cost of environmental protection has increased. In order to achieve the mission of energy saving and emission reduction, local governments have all stepped up the efforts to control environmental pollution, virtually increasing the production costs of plastic processing companies. Second, the long-term operation of raw material costs is high, rents for land and workshops have risen, and labor costs have risen. All this has led to a significant increase in the production and operating costs of enterprises. The third is the increase in product safety costs. With the increase of people's awareness of product safety, the safety standards for plastic products are also rising. Cao Yu, executive vice chairman of the China Plastics Processing Industry Association pointed out that “internal concerns†are actually a reflection of the deep-level structural contradictions in the development of the plastics processing industry. The "Twelfth Five-Year Plan" is a crucial period for China's plastics processing industry to achieve "growth" and "quality improvement." The task of structural adjustment, transfer of methods, and balanced development is very arduous. After the outbreak of the financial crisis in 2008, the Chinese government adopted measures to ensure growth and expand domestic demand for the rescue of the market. Plastics processing industry quickly emerged from the bottom, but the deep structural conflicts facing the industry have not been fundamentally resolved. To get rid of the predicament facing the industry at present, one cannot expect to do a good job in one battle, and must unswervingly adhere to the general direction of structural adjustment, transfer of methods, enhancement of technological innovation capabilities, and enhancement of brand efficiency.
Fixed gear bikes and track bikes have single speed drivetrains
without a freewheel – that means if the rear wheel is moving, so are your legs,
so fixie Bike need match with Fixie Crankset. Single speed bikes have a single speed chainring, that Bicycle Crankset can be produced
to 48T - 52T specification. As a high-end good quality Bike Crank Set, the key here
is finding the right combination of chainring size and rear sprocket to provide
the gear ratio you need for your riding style and terrain. This crankset
made by military grade aluminum alloy material, manufacture using forged and
CNC machined processes, so it has high level safty and longer service life.
Bicycle Crankset,Bike Crank,Fixie Crankset,Bike Crank Set Suzhou Jingqiyao Intelligent Technology Co., Ltd. , https://www.jingqiyaoparts.com
Some people in the industry use “internal worries and difficulties†to describe the current environment facing the plastics processing industry. "Outside difficulties" are mainly manifested in the slowdown in world economic growth, various types of risks have increased significantly, and the growth rate of international trade has fallen. The export of plastic products in China has been greatly affected. According to the data provided by the Ministry of Information Industry of China Plastics Processing Industry Association, the export volume of plastic products in China was 13.407 million tons in 2011, a decrease of 10.77% from the previous year. The proportion of export delivery value to sales output also decreased, and the export market was shrinking. . 
