Driving a car in the city usually has street lights. It is not a problem. However, driving on roads with few street lights or street lights is really tiring. Take the following measures: Driving a car in the city usually has street lights. It is not a problem. However, driving on roads with few street lights or street lights is really tiring. Take the following measures: First, you can use the high beam when driving, switch to low-beam light 100 meters before the traffic, and then use the high beam light. 2. There are yellow or white lane lines on the general roads. Pay more attention to the lane line at the front when driving at night. This will make it easier. Third, when the car, do not have to take care of the face to the car, you still look at the lane line in front of you, as long as driving in their own lane, the appropriate deceleration on the line. Generally speaking, drivers will approach the lights when they are in the car. They will not be very dazzling. Of course, some newcomers do not understand the use of high beam lights and low beam lights. They have always used high beam lights and some unreasonable drivers. It will always use high beam, which can only be further slowed down. You just need to pay attention to the road ahead in front of you. Don't worry. Fourth, the rainy days are more troublesome. The rain on the road will be reflective and the lane line cannot be clearly seen. At this time, it is best to follow the car, drive the low beam light to follow the front of the vehicle to drive more easily, not too far away from the car. If you don’t have a car to follow and only drive a little slower, there will always be some people with good driving skills that are ahead of you and you can follow the car. In addition, at night, the road surface after the rain is generally gray and black, bumps, mud pits, potholes are black, and the water is white.
Fully refined paraffin refers to a product obtained by using oil-containing wax as the raw material, degreased by sweating or solvent, and then refined by clay or hydrogenation.
Fully refined paraffin is also called refined white wax. The appearance of fully refined paraffin is white solid, with block and granular products. Its product has a higher melting point, less oil content, no sticking at room temperature, no sweating, no greasy feeling, waterproof, moisture-proof It has good electrical insulation. Because of its high degree of sophistication and low content of fused aromatic hydrocarbons. It has good chemical stability and light, good thermal stability, strong toughness, good plasticity, white color, no mechanical impurities and moisture, and no smell. Fully refined paraffin can be Soluble in: benzene, ether, chloroform, carbon disulfide, carbon tetrachloride, turpentine, petroleum, fixed oils.
Mainly used in high-frequency porcelain, carbon paper, stylus wax paper, precision casting, decorative sound-absorbing board and other products. Also used in packaging, electronics, textile candle crayons, match making and other industries. In addition, manufacturing high-grade candles and various industrial, civilian candle products Raw materials and additives, modifiers, etc.
Fully Refined Paraffin Wax,Paraffin Wax Fully Refined,Fully Refined Paraffin Wax 58 60,Sinopec Paraffin Wax Fully Refined,Kunlun Fully Refined Paraffin Wax Henan Shunbang Chemical Industry CO.,Ltd , https://www.spvcresin.com