Sodium hydrosulfite is widely used in the textile industry for reducing dyeing, reducing cleaning, printing and decoloring, and for bleaching silk, wool, nylon and other fabrics. Because it does not contain heavy metals, the bleached fabric has bright color and is not easy to fade. In terms of various substances, sodium silicate can also be used for food bleaching, such as gelatin, sucrose, honey, etc., soap, animal (vegetable) oil, bamboo, porcelain clay, etc. Sodium hydroxide can also be used in organic synthesis, such as reducing agent or bleaching agent in the production of dyes and medicines. It is the most suitable bleaching agent for wood pulp and papermaking. Moreover, many heavy metal ions such as Pb2+ and Bi3+ can be reduced to metals in water treatment and pollution control, and it can also be used to preserve food and fruits. However, due to the many dangers of sosso, many of its uses tend to be replaced by thiourea dioxide, which is safer and easier to store and transport. Sodium Hydrosulfite,Sodium Hydrosulfite 88%, Sodium Hydrosulfite 90% HENAN JINHE INDUSTRY CO.,LTD , https://www.hntitaniumdioxide.com
LED big screen software empty point function Do you know how to use it?
How do you set up and use the LED large screen software empty point function? Do you know? LED big screen software empty point function Do you know how to use it?
1, first determine the number of module snapshots
Observe the number of ICs in a set of data, the number of pixels, and then use the following formula:
Number of sweep points = number of ICs * number of IC output pins / number of lights per pixel - actual pixel point / scan mode
The number of lights per pixel is 3 for full color, and 4 for full color.
For example, a 30X16, 4 sweep 1 set of data full color real pixel module, the driver IC is MBI5024 (16 output pins), the number of IC is 24, calculated as follows:
24*16/3 - 480/4=8, the number of points per sweep is 8
2, software settings
1. Open the software and enter the control LED screen - screen management - configure the selected screen parameters, select the smart settings button, and a dialog box appears.
2. Select the empty point setting and enter the empty point setting window. Enter the number of each sweep point as follows:
3, LED large screen empty button Other intelligent setting wizard can be set as normal, when the intelligent setting wizard 7 is pressed as normal, if there is no flash on the screen, click the empty button on the software until the screen appears Click the flash and then draw the points as usual, and then proceed until the trace is completed.