The luxury commercial vehicle is a high-end vehicle, elegant and concise in appearance, giving a noble feeling. In the interior of the car there is luxurious decoration, leather seats and spacious space. The overall vehicle performance is good, and good start can be achieved. Speed ​​up. In order to maintain a good loading of luxury commercial vehicles, it is essential for the maintenance of vehicles, and it should pay full attention to the maintenance of luxury commercial vehicles. Specifically, attention should be paid to the following issues in order to ensure the maintenance of the vehicle. First, the maintenance of the exterior of the vehicle. In terms of the appearance of the vehicle, our main work is to ensure that the appearance of the vehicle is not damaged. If there is a bump or friction, repair it in time to ensure that the appearance of the vehicle is not damaged. In addition, attention must be paid to the relevant parts of the vehicle that can be seen outside. For example, when using a sliding door, the door should be opened and closed automatically through automatic control. Do not pull it by hand, which may cause damage to the door. When using the sun visor, unlocking can be achieved by pressing a button instead of pulling by hand. The sunroof switch of the vehicle also has a related control system, which is to be used through system adjustment to reduce human-induced interference. These control systems should be regularly tested to ensure proper operation. Second, the maintenance of the interior of the vehicle. The maintenance of the interior of a luxury commercial vehicle is mainly directed at the leather seat. We have to pay attention to such issues when we are maintaining the leather seat. When only floating soil is used, wipe it with a soft clean cloth. If there is oil, wipe it with a special leather care cleaner. These leather seats should be regularly sent to a professional maintenance shop for cleaning. Leather seats have a great influence on the overall quality of the vehicle and basic maintenance work should be done. There is the car accessories to choose the right mix, it is recommended to choose silver jewelry, there is a noble feeling. The automatic control system of the vehicle must be upgraded regularly to ensure that the system can operate normally. Metal Body Square Water Cooling Tower This series of products run stable, low noise, energy-saving, in office buildings, shopping malls, hotels, residential areas and other central air-conditioning supporting the use of better results. Metal Body Square Water Cooling Tower,Tower Water Cooler,Water Cooled Cooling Tower,Tower Cooling System Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhou-arkfluid.com
The company's standard cooling tower according to the international design conditions design, can also provide customers with non-standard operating conditions or specific sizes under the special, special design.
The circulating water pump suction port shall be located below the water level of the cooling tower catchment basin, and the cooling tower outlet pipe shall not be allowed to be higher than the maximum water level of the catchment basin.
Pipe mounts should be pipe racks and cooling towers should not be allowed to directly bear the weight of the pipes.
The rehydration pipe of the cooling tower should be provided with a support stand to avoid vibration of the pipe when the float valve is rehydrated.
Rehydration pressure should be below 5m water pressure, national standard
The flannage pressure is 1.0Mpa.
When two or more units are assembled, our company will provide a connecting balance tube to balance the chassis water level. The tower top inlet should be set with a conditioning valve in order to enter each
.The water level of the tower is uniform.
The noise is measured at dm1.13VL-W at the equivalent diameter of the cooling tower (Dm1.13VL*W), 1.5 meters above the ground height, wherein L and W are the shape rulers of the tower
inch long and wide).
The use of cellular continuous blister series of diversion,heat dissipation, water collection three-in-one native filler, the whole suspension, gravity cloth water, low drop of water, with cold effect
High, low energy consumption, less drift water, less noise and so on, floating water rate is less than 0.001%.
When connecting different types of towers, the bottom basin water level height of different types of towers must be taken into account, and the base height must be adjusted to maintain the water level balance of the towers.