Common transportation accidents and prevention in mines

(1) When walking, do not pay attention to the vehicles before and after, and encounter the vehicle running without timely avoiding, causing casualties.

(2) Failure to comply with the relevant regulations of the underground, climbing, driving, causing crushing, falls, bruises or electric shock.

(3) When the blaster transports the explosive materials, it is not transported according to the regulations, so that the detonator is crushed or shaken too much and the explosion is wounded.

(4) When the passenger car is in the car, the body sticks out of the car. When the car is not stopped, it is rushed to get on and off, and it is scratched and crushed.

(5) Human cart, pay no attention to before, after pedestrians and vehicles, or flying car, or a violation of the provisions pushed more than a vehicle "Coal Mine Safety Regulations", resulting in bumps, bruises, and other crushing injury accident .

(6) The roadway section is too small, or laterally strolled, causing pedestrian bruises, crushing and even death.

2. Main causes of common transportation accidents in mines

(1) Pedestrians violate the rules. Such as climbing and braking; when the train is running, walking in the middle of the roadway.

(2) The driver violated the rules. Violation of the top of the car; the cart person pushes more than one vehicle; the carter sideways cart.

(3) Transportation management is not strict. There are many debris in the roadway, and the roadway deformation is not repaired in time; the necessary car stop and signal lights are lacking.

3. Mine transportation accident prevention measures

(1) Obey the rules and regulations of transportation management, and it is strictly forbidden to climb and brake.

(2) Compliance with the manual cart regulations. When the cart is used, the personnel must pay attention to the front. When starting the cart, finding people or obstacles in front and approaching the exit, corner, laneway, damper, and diverticulum exit, the cart person must send a signal; When the cart is oriented, the track slope is less than or equal to 5‰, and the distance between the two cars is not less than 10 meters. When the slope is greater than 7‰, the manual cart is strictly prohibited.

(3) Strict transportation management. Drivers of electric motor vehicles must be certified to work; strictly implement the "Operational Regulations" and "Post Responsibility System"; regularly repair locomotives and mining vehicles.

(4) The section of the roadway shall be constructed according to the regulations, and the mine track shall be laid according to the standard to strengthen the maintenance.

(5) When walking in the roadway, walk the sidewalk, do not walk in the middle of the track, do not arbitrarily cross the motor car track, winch lane, when carrying long tools, pay attention to avoid hurting others and touching the overhead line, when the vehicle is close When you want to enter the shelter, you should immediately avoid it.

(6) When crossing the main road and passing through corners and intersections, it is necessary to “one stop, two look, three pass”; no one can pass through the bottom of the shaft and the inclined shaft; When walking in an inclined lane, do not walk with the vehicle in accordance with the regulations of “Pedestrians do not drive, do not walk without traffic”.

(7) The location where the fence is fenced and the dangerous warning sign is hung is very dangerous and cannot be entered without permission; the blasting operation often injures people, and it is not allowed to pass the blasting warning line and enter the blasting warning zone.

(8) When passing by someone who is working, be sure to say hello first, so as not to let people touch people.

(9) During the walking process, you should pay attention to all kinds of signals in the lane, and pass by to and from the vehicle. Do not laugh, quarrel and fight.

Engine Cylinder Head

cummins cylinder head,complete cylinder head,Hino cylinder head,KUBOTA cylinder head,KOMATSU cylinder head

XINGTAI GUANGJI MACHINERY TECHNOLOGY CO.,LTD , https://www.xtgjmachinery.com