4 Cubic Feet Wheel Barrow with Wooden Handles

September 17, 2018

  • Model NO.: WH4400
  • Usage: Tools
  • Wheel Type: Pneumatic Wheel
  • Style: Unfolding
  • Main Market: North America
  • Origin: Qingdao
  • Material: Wood
  • Load Capacity: 100-200kg
  • Wheel Amount: 1
  • Surface Handling: Paint
  • Trademark: KOVO
  • HS Code: 8716800000
4CBF WOODEN HANDLE WHEELBARROW


KOVO WHEELBARROW
Model NO.: WH4400
Load capacity: 100KG
Water capacity: 58L
Sand capacioty: 5CBF
Wheel: 14"*4" air wheel
Packing: In pallet;
Popular color: Black/Red

Our advantage:
1. Well communication before placing order to avoid any misunderstanding.
2. Production plan is arranged from Sales department to Product department via paper.
3. New sample assembled before every bulk production to make sure the products could be well assembled.
4. Quality control moulds during production to maintain the quality for each parts.
5. Assembled sample test for all finished parts to make sure the products are good.
6. Well package based on request.
7. We are keeping improving our services of the whole process.
8. We could make quick improvement on the products based on the market.
9. We could do COC, CIQ files to some special markets.

We focus on high quality service for you.
 
KOVO  WHEELBARROW
Model NO.: WH5400
Load capacity: 100KG
Water capacity: 78L
Sand capacioty: 5CBF
Wheel: 14"*4" air wheel
Packing:  In pallet; 
Popular color: Black/Red
4 Cubic Feet Wheel Barrow with Wooden Handles
4 Cubic Feet Wheel Barrow with Wooden Handles
4 Cubic Feet Wheel Barrow with Wooden Handles
 

All planetary cycloidal reducer gear can be divided into three parts: input parts reduction output section on the input shaft is equipped with a displacement of 180 double eccentric sleeve, turn on the eccentric sleeve is equipped with two called arm of roller bearing, the formation of H institutions two cycloid gear center hole is the eccentric sleeve on the turning arm bearing raceway, and by a group of cycloid gear and pin gear mesh circular permutation needle, to form tooth difference for the internal meshing gear reducer is organization,( 1437669,in order to reduce friction, in the speed reducer ratio is small, the needle with needle teeth on the gear set)

When the input shaft with eccentric sleeve rotation for a week, because of the characteristic of the cycloid gear tooth profile curve and its restricted by needle on the gear teeth, the movement of the cycloid gear becoming both revolution and rotation of the plane movement, turn on the input shaft is week, eccentric sleeve also turn the week, Cycloidal Wheel turned a gear reduction is obtained in the opposite direction, and then with the help of W output mechanism, the cycloid gear rotates at low speed movement through the pin shaft.

Output Shaft

Output Shaft,Output Shaft of Cycloidal Pinwheel,Output Shaft of Transmission Gear Motor

JiangYin JiaYou Reducer Co., Ltd. , http://www.general-reducer.com