Nathan Machinery (Renyi Casting) is your best choice for your Die casting supplier ! Email us IMMEDIATELY for your RFQ !!! You will get the FAST reply and reasonable technical suggestion from our experienced team, you're not only our client, but also we will take you as partner !!! We have good reputation in the USA, west Europe market. Cast aluminum Grades: G-AlSi9Mg, AlSi10Mg, A380, A360, ADC12 Die cast machine : 1250T, 800T, 500T, 280T, 180T. Surface finish : Precision machining, impregnation treatment, Mirror polish, powder coating , chrome plating, bronze color film coating, and specialty finishes. High Efficiency Spirotal Heat Exchanger The equipment is made of two rolls forming spiral channels.Two kinds of heat transfer media can flow in full countercurrent, which greatly enhances the heat transfer effect, Even small temperature difference can achieve ideal heat transfer. High Temperature Spiral Plate Heat Exchanger,Spirotal Heat Exchanger Equipment,Spiral Board Plate Heat Exchanger,Carbon Steel Spiral Plate Heat Exchanger Yangzhou Tongyang Chemical Equipment Co., Ltd. , https://www.tongyangchemic.com
The nozzle of tangential structure with Low resistance, Due to helical channel are average curvature, There is no big liquid flow, Therefore, the design flow rate can be increased so it has high heat transfer capacity.
Type I Non detachableSpiral plateHeat exchanger`s helical channel are welded and sealed, so it has high sealing performance.
Type II detachableSpiral plateHeat exchanger`s Structure principle similar to above,But one of the channel can be disassembled and cleaned, especially for heat exchange with viscous and precipitated liquid.
Type III detachableSpiral plateHeat exchanger`s Structure principle similar to above,But two channels can be disassembled and cleaned,ranges aremore extensive.
The nominal pressure PN of spiral plate heat exchanger is 0.6, 1, 1.6 and 2.5MPa (refers to the maximum working pressure of single channel) , material can be divided into carbon steel and stainless steel.Customers can choose according to the actual process
When a single device cannot meet the requirements, multiple devices can be used in combination, but the combination must conform to the following provisions: parallel combination, series combination, equipment and channel spacing is the same. Hybrid combination: one channel in parallel, one channel in series