What is the reason that the sprinkler cannot absorb water?

3. Check whether the inlet pipe is sealed step by step, and eliminate the failure of the leak.
　　
4. The water diversion height of the water pump used by common sprinklers should be less than 5 meters.
　　
5. Check if the water pump oil seal of the sprinkler is damaged, and the leakage of the pump shaft affects its vacuum. Replace the seal.
　　
6, the sprinkler engine speed is too low, can not reach the required vacuum, adjust the throttle to make the speed at about 1700 rev / min, the gearbox may require different engine speed.
　　
7. Check whether the power take-off device of the sprinkler is working or not. The power take-off and the drive shaft can cause the water pump to fail to work.
　　
8, check the sprinkler pump speed is normal, there is no abnormal noise. If you can't move it, there is a lot of debris around the blade.
　　
9, in addition to the detection process to avoid long-term idling of the pump, causing the pump temperature is too high affect its life.
　　
When the sprinkler fails to pump water, it may be due to the following reasons.
　　
1. Sprinkler tank Because of the long-term use of uncleaned dirt inside the tank, or the source of water used is too dirty, the outlet strainer or pump body is blocked.
　　
2. If there is a failure of water in the sprinkler during the winter season , it may be considered that the inside of the tank and the water pump of the sprinkler are frozen and cracked to cause the above failure.

    For more information on sprinkler, sprinkler price, welcome to inquire!

Double Layer Roll Forming Machine

Double Layer Roll Forming Machine

Double Layer Roll Forming Machine are widely used in building: the steel-structured large-scale warehouses, plants, supermarkets,

shopping malls, trade markets, stadiums, holiday villages, sanatoriums, hotels, villas, residences, and

different kinds of greenhouses. What's more, equipment can be designed and manufactured as customers' requests.

Double Layer Roll Forming Machine Production Process

Uncoiling→Feeding material into machine→Roll forming→Measuring length→ Auto cutting→

Products receiving

Parameter

Double Layer Roll Forming Machine, Steel Roll Forming Machine, Double Layer Sheet Roll Forming Machine

Zhongtuo Roll Forming Machinery Co., ltd , https://www.frameforming.nl