Mold Guiding Set,Anode Punch Mold Guiding Pier,Mechanical Parts Processing,Pole Piece Cutting Die Guiding Set Guangdong Rixin Precision Technology Co., Ltd. , https://www.nissontooling.com
What are the general requirements for the layout of the compressor?
(1) The arrangement of the compressor unit and its ancillary equipment shall meet the requirements of the manufacturer; (2) the compressor shall be arranged near the equipment to be pumped, and its ancillary equipment shall be arranged close to the unit; (3) Arrangement of the combustible gas compressor The following requirements shall be met: 1) The distance from open flame equipment and non-explosion-proof electrical equipment shall comply with the current national standards “Code for Design of Explosive and Fire Hazardous Environment Power Equipment†GB50028 and “Design Rules for Fire Protection of Petrochemical Enterprises†GB50160; ) should be arranged in the open air or semi-open. It can be arranged in the factory in cold or windy sand areas; 3) Class A gas compressor plant with single drive power equal to or greater than 150kw, it is not suitable to share a building with other Class A, B and C rooms; above the compressor, Class A, B, and C liquid equipment shall not be arranged, but the high-grade lubricating oil tank for own use is not subject to this limitation.
(4) For single-layer compressors, when the foundation is high, the operating platform should be set as required; when there are more auxiliary equipments, it is better to arrange them in two layers.