Wafer/Lug/Swing/Grooved End Type Butterfly Valve/Check Valve

September 18, 2022

Model NO.: HQCV
Work Pressure: Low Pressure (Pn<1.6mpa)
Working Temperature: Normal Temperature (-40°C<T<120°C)
Material of Seal Surface: Soft Sealed
Valve Body: Casting
Standard: ANSI, DIN, BS
Application: Industrial Usage
Size: Dn50-Dn350
Norminal Pressure: Pn1.0/1.6mpa
Mediums: Water. Oil, Gas
Temperature: -25~120c
Trademark: HQ
Transport Package: Packed in Wooden Cases
Specification: ISO
Origin: China
HS Code: 8481804090
Butterfly Valve: Worm gear wafter type butterfly valve, worm gear lugged butterfly valve, handle wafer butterfly valve, wafer metal seated butterfly valve, grooved end butterfly valve

Wafer Type Butterfly Valve With Gear Operator
Body: Cast iron, Ductile iron
Disc: Ductile iron, stainless steel 304/316, aluminum bronze,
PTFE coating, nylon painting
Sterm: CS, SS416, SS410, SS304, SS431
Seat: NBR, EPDM, PTFE
Pressure: PN10, PN16

Casting Iron Valves:
Type: Butterfly valves, Gate valves, Check valves, Global valves, Y strainer
Size:DN40-1200 or 1.5-48' or above
Working Pressure: PN10/16/20/25,150LB-2500LB
Suitable temperature:  -45c~150c 
Standard:
(1)Design and manufacture:DIN3352, BS5163,BS5150, ANSI B16.34, API600, API6D,API609,EN593,GB,T12238 
(2)End connection: ANSI B 16.1,ASME B16.5, B16.47, B16.25, B16.34, JISB2212-JISB2214, DIN2543-2550,EN1092, AS2129, ISO 5211
(3)Wall thickness: API600, BS1868
(4)Face to face (end to end): EN 558, ASME B16.10, DIN3202, ISO5752, JIS,API609, MSS, BS5155
(5)Inspection and test: API598, EN12266-1, BS6755,API6D, ISO5208
Materialfor main parts:
(1)Body: CI, DI, WCB, ALB, CF8, CF8M
(2)Disc: DI, ALB, C95400, Rubber lined Disc, 1.2501, 1.4529, CF8M, CF8, Hastelloy
(3)Stem: SS416, SS410, SS304, SS431
(4)Seat: NR, Hypalon, EPDM, Neoprene, NBR, Wear-Resistant EPDM, Viton, Silicon, Heat-Resistant EPDM, WhiteNBR, WhiteEPDM,EPDM(NSF), PTFE
Coating: Fusion bonded epoxy coated
Connection type: Flanged type, Push-on type, Mechanical Joint type, Plain ends type
Sealing: Soft sealing or metal-to-metal seat, Flexible graphite 
Operation: Manual, Pheunatic, Electric, Hydraulic and Pnewmatic-Hydraul
Appropriate medium: Air,water,sewage,steam,coal gas,oil
Packaging: Export polywood cases, or as per customers' requirements
Min Order Quantity: According to customer's requirement
Delivery Time: 30 days after order conformed
Payment: By T/T or L/C
Application: Fresh water, sewage, sea water, air, vapor, food, medicine, oils. acids, alkalis, salt etc.
                  Wafer/Lug/Swing/Grooved End Type Butterfly Valve/Check Valve

 

Stainless Steel Cut Wire Shot Conditioned

Stainless Steel Shot is a very useful Metal Abrasive for shot blasting, which could make die casting parts have a matte surface.

Generally, Stainless Steel Shot could be divided into two types. One is as cut one and the other one is conditioned one. The as cut one is obtained by cutting the stainless steel wire directorly. It has sharp edge and sometimes it may scratch the soft parts when shot blasting. So it is important to choose suitable Metal Abrasive. While for conditioned, usually there are three shapes and they are G1, G2, and G3. For our Longlived Stainless Steel Shot, there are even G4 one. It has been rounded four times and it is very similar with a sphere. It has a great effects on surface treatment.


Stainless Steel Cut Wire Shot Conditioned,Sus201Stainless Steel Cut Wire Shot Conditioned,Ss202 Stainless Steel Cut Wire Shot Conditioned,202 Stainless Steel Cut Wire Shot Conditioned

Longlived Metal Products Co ., Ltd , https://www.stainlesssteelshotcn.com