Vacuum reduction unit capacity is 30L.60L.90L.125L.200L, 425L. vacuum pressure device to import the solvent into the vacuum flask, greatly improve the recovery rate, but also reduce the solvent foaming and volatile, realize the recovery of tasteless.Vacuum Pressure Reducing Device Vacuum Pressure Reducing Device Vacuum Pressure Reducing Device,Vacuum And Pressure Relief Equipment,Vacuum Pressure Relief Device SHENZHEN KUANBAO ENVIRONMENTAL EQUIPMENT CO., LTD , http://www.calstarkb.com
Kunshan Jenada Machinery Co.,Ltd. is a professional enterprise in cutting tool production and sales.Our company specializes in manufacturing sphpiscated Bimetal band saw blades series,Carbide tipped bandsaw blades and Food bandsaw blades Series.We provide customers with products of excellent quality at a competitive price.
For the Bi-metal bandsaw blades,the teeth are welded using cobalt-alloy with hardness reaching HRC69-70.M51 Tooth and Substrate jointing by laser after separately special spring steel heat treatment.Tooth's rigidity and Substrate's intension exert their use to the extreme.This saw is suitable for cutting Heat-resisting alloyLow-carbon stee\Medium carbon steel,High-carbon steel and Non-ferrous metal.Which results in cost saving and improves cutting efficiency.
We provide customers with products of excellent quality at a competitive price.
sizeÂ
10/14
8/12
6/10
5/8
4/6
3/4
2/3
1/1.5
1.4/2
0.75/1
19mmx0.9
ok
ok
ok
ok
ok
ok
27mmx0.9
0k
0k
ok
ok
ok
ok
ok
34mmx1.1
ok
ok
ok
ok
ok
ok
ok
41mmx1.3
ok
ok
ok
ok
ok
ok
ok
ok
ok
54mmx1.6
ok
ok
ok
ok
ok
67mmx1.6
ok
ok
ok
ok
ok
80mmx1.6
ok
ok
ok
ok
ok
The choice for the tooth angle
Â
Front Angle
The range of the cutting material
Steel types
Note
0°
1.the profile angle is bigger and the strength is higher, so it's suitable for cutting different kinds of the material
It's better to choose the bigger front tooth agnle when the stiffness for the procee system is poor or the power for the saw machines is shortage
0°~5°
1.suitable for cutting brittle materials;
Such as: gray cast iron,
High speed steel and chilled cast iron, tool steel, alloy steel, spring steel, high quality carbon structural steel, bearing steel, steel, martensite stainless steel and heat resistant steel
(HT200,65Mn,W18Cr4V,T12,50Cr,60Si2MnA,1Cr12,1Cr13,GCr15)2.suitable for cutting hard material; 3.Suitable for interrupted cutting or the forging ,casting with crustaceous; 4.applicable to small section,thin walled pipe
6°~10°
1.applicable to the workpiece material strength,low hardness, and good plasticity
Such as: ordinary carbon structural steel, high quality carbon structural steel, alloy steel, carbon tool steel and austenitic stainless steel, nodular cast iron, nonferrous metals
(Q235-A,20,30,45,T10,40Cr,20CrMo,1Cr18Ni9Ti,Cu
And so on)2.suitable for cutting solid material,thick walled pipes
Â
Â
Tubes steel Cutting Bimetal Bandsaw blades
Kunshan Jenada Machinery Co.,Ltd. is a professional enterprise in cutting tool production and sales.Our company specializes in manufacturing sphpiscated Bimetal band saw blades series,Carbide tipped bandsaw blades and Food bandsaw blades Series.We provide customers with products of excellent quality at a competitive price.
For the Bi-metal bandsaw blades,the teeth are welded using cobalt-alloy with hardness reaching HRC69-70.M51 Tooth and Substrate jointing by laser after separately special spring steel heat treatment.Tooth's rigidity and Substrate's intension exert their use to the extreme.This saw is suitable for cutting Heat-resisting alloyLow-carbon stee\Medium carbon steel,High-carbon steel and Non-ferrous metal.Which results in cost saving and improves cutting efficiency.
We provide customers with products of excellent quality at a competitive price.
sizeÂ
10/14
8/12
6/10
5/8
4/6
3/4
2/3
1/1.5
1.4/2
0.75/1
19mmx0.9
ok
ok
ok
ok
ok
ok
27mmx0.9
0k
0k
ok
ok
ok
ok
ok
34mmx1.1
ok
ok
ok
ok
ok
ok
ok
41mmx1.3
ok
ok
ok
ok
ok
ok
ok
ok
ok
54mmx1.6
ok
ok
ok
ok
ok
67mmx1.6
ok
ok
ok
ok
ok
80mmx1.6
ok
ok
ok
ok
ok
The choice for the tooth angle
Â
Front Angle
The range of the cutting material
Steel types
Note
0°
1.the profile angle is bigger and the strength is higher, so it's suitable for cutting different kinds of the material
It's better to choose the bigger front tooth agnle when the stiffness for the procee system is poor or the power for the saw machines is shortage
0°~5°
1.suitable for cutting brittle materials;
Such as: gray cast iron,
High speed steel and chilled cast iron, tool steel, alloy steel, spring steel, high quality carbon structural steel, bearing steel, steel, martensite stainless steel and heat resistant steel
(HT200,65Mn,W18Cr4V,T12,50Cr,60Si2MnA,1Cr12,1Cr13,GCr15)2.suitable for cutting hard material; 3.Suitable for interrupted cutting or the forging ,casting with crustaceous; 4.applicable to small section,thin walled pipe
6°~10°
1.applicable to the workpiece material strength,low hardness, and good plasticity
Such as: ordinary carbon structural steel, high quality carbon structural steel, alloy steel, carbon tool steel and austenitic stainless steel, nodular cast iron, nonferrous metals
(Q235-A,20,30,45,T10,40Cr,20CrMo,1Cr18Ni9Ti,Cu
And so on)2.suitable for cutting solid material,thick walled pipes
Â
Â
Vacuum vacuum pump
Vacuum recovery unit
Vacuum pressure relief equipment
Tubes Steel Cutting Bimetal Bandsaw Blades
Model NO.: QND-90
Saw Cutting: Stainless Steel Cutting Band Saw Blades
Material: High-speed Steel
Standards: P
Style: Band Saw Blade
Structure: Band Saw Blade
Cutting Process: Saw Cutting
Work Type: Cut Off
Trademark: QND
Specification: 27mmx0.9x5/8TPI
Origin: Original China
HS Code: 82022100
Model NO.: QND-90
Saw Cutting: Stainless Steel Cutting Band Saw Blades
Material: High-speed Steel
Standards: P
Style: Band Saw Blade
Structure: Band Saw Blade
Cutting Process: Saw Cutting
Work Type: Cut Off
Trademark: QND
Specification: 27mmx0.9x5/8TPI
Origin: Original China
HS Code: 82022100
Tubes steel Cutting Bimetal Bandsaw blades