In recent years, the state has paid more attention to the energy conservation and environmental protection industry, and it has been identified as one of the seven strategic emerging industries planned during the “Twelfth Five-Year Plan†period in China. In addition, the tight energy supply, insufficient power supply, and low power quality have contributed to the vigorous efforts of the smart grid. Construction.
Universal crusher is suitable for pharmaceutical, chemical, metallurgy, food, construction and other industries. It can process hard and hard materials, including plastic, copper wire, Chinese herbal medicine, rubber, etc. It can also be used as the supporting equipment before the processing of micro crusher and ultra-micro crusher. Its powder collecting chamber adopts fully enclosed noise reduction structure, which can effectively reduce the working noise. The machine is equipped with a cooling device to reduce the temperature and work more smoothly. The motor speed of the machine is 5000 RPM. The machine is made of lcr18Ni9Ti stainless steel material, with strong wear and corrosion resistance characteristics, suitable for processing advanced and corrosive materials. The machine adopts the impact crushing method, so that the material into the crushing chamber, by the high-speed rotary six movable hammer impact, through the gear ring and the material collision with each other and crushed, crushed material with the help of air flow, through the sieve into the powder bag, leaving no residue. It has the advantages of high efficiency, low noise, reliable work performance and product quality, safe operation, drug hygiene and low loss.
1. Before using the universal jet mill, check whether all fasteners of the machine are tightened and whether the belt is tightened.
2. The running direction of the spindle must conform to the direction of the arrow shown on the protective cover, otherwise the machine will be damaged and personal injury may be caused.
3. Check whether the electric appliance of the mill is complete.
4. Check whether there are metal and other hard sundry objects in the crushing room of the mill, otherwise it will break the knife tool and affect the operation of the machine.
5. The purity of the material must be checked before crushing, and no hard metal sundry is allowed to mix in, so as not to damage the dao tool or cause combustion and other accidents.
The oil cup of the crusher should be frequently injected with lubricating oil to ensure the normal operation of the machine.
7. Stop feeding before shutdown, if not continue to use, to remove the machine left behind.
8. Regularly check whether the screen is damaged. If there is damage, it should be replaced immediately.
9. When using, if the crusher will have small vibration, be sure to tighten the handle connecting the cover to avoid accidents.
JXM Series Univeral Jet Mill,Universal Pulverizer,Universal Grinder,High Effective Jet Mill Shandong Jing Xin Powder Equipment Technology Co., Ltd. , https://www.jxpowder.com
This has led to the development of the smart power meter market. From the past three years, the sales volume of the smart power meter industry in China was less than 2.5 million units in 2010, and it has grown to about 3.3 million units in 2011. This figure exceeded last year. 4 million units. The average annual compound growth rate reached 29.62% in the past three years. It is expected that by 2016, the growth of smart power meters in China will exceed 40%.
According to the development plan of the State Grid Corporation of China, the development of the smart grid in China will go through three stages of development, namely, technology research and development and standard development, comprehensive construction and improvement. At present, the development of China's smart grid has entered a phase of comprehensive construction, which has created a huge market demand for smart meters.
After 2016, China's smart grid will enter the stage of perfect improvement, and some old and old meters will be upgraded. Therefore, after 2016, China's smart power meter market will continue to grow substantially.