The rear wheel alignment and front wheel alignment are called four-wheel alignment. The installation of the steering knuckle, the steering wheel and the front axle of the tunnel cleaning truck has a certain relative position, and this type of installation with a certain relative position is called the steering wheel positioning. It can also be called front-wheel positioning. The front wheel alignment mainly includes four main contents including the front wheel toe, the kingpin caster, the front camber, and the kingpin tilt. Well, this is also true for the two steering wheels. For both rear wheels, there is also a relative position between the rear axle and the rear axle. This is called the rear wheel alignment. Now. The rear-wheel positioning includes the contents of the front toe of the rear wheel and the camber of the wheel. When it comes to four-wheel alignment, it is of great benefit to tunnel cleaning vehicles. After the four-wheel alignment of the vehicle is completed, the tire can be maintained at a best angle. When the grip is improved, the comfort can be better protected. Then, in normal use, the new tunnel cleaning vehicle should be inspected on the four-wheel alignment after being used for three months. After that, the inspection can be postponed at 10,000 kilometers. If there is a collision after transposition, it is necessary to do four-wheel alignment. Four-wheel positioning in the safe and normal cab of the tunnel cleaning vehicle is of great importance. After a relatively long time after the tunnel cleaning vehicle has been driven, due to various reasons, there will be parts wear acceleration, vehicle deviation, and tires. Unusual wear, heavy steering wheel, sudden increase in fuel consumption, etc. It is because of these reasons that the main factors that have caused the decline in the use performance of tunnel cleaning vehicles have been caused. If these conditions are to be eliminated one by one to ensure the stability of the vehicle, then the most effective and direct method is to do four-wheel alignment. This will not only ensure the safe and normal driving of the vehicle, but also effectively extend the The service life of the tires, but also can reduce fuel consumption. (Text / Sun Ni) Matting Agent For Industrial Coatings
Description
1,
Silica Matting Agent reduce the gloss of a variety of products including
coatings, paints, inks, lacquers, varnishes, while providing lower viscosity
and better flow capability. It is synthetic amorphous silica
appearing as white powder. It is a micronized precipitated silica matting agent
for both solvent-based and water-based system. These efficient matting agent
are suitable for unpigmented and pigmented systems. Careful design and control
of silica physical properties ensure dispersion
stability, hand-feel, anti-setting behavior and scratch resistance in
solvent-borne and water-borne system.
2, Matting
Agent
specialized used for the Industrial coatings. It provided high matting
efficiency, excellent coating appearance and high transparency. As well as low
oil absorption, easy dispersion and smoothly touch with minimal impact of
viscosity.
Feature
1) High Matting
Efficiency: High pore volume reaches to 1.8-2.0 ml/g, and fine
control of the particle size and particle size distribution.
2) Easy to Dispersion: The matting agent
can be easily added in any production procedure and can be easily dispersed, which
saves the processing time.
3)Good handing feeling and improvement in
scratch resistance: It is development of smooth films with excellent hand-feel,
scratch resistance and stain resistance.
Application
1, Industrial
Coating, Metal baking Coating, Decorative Coating
2, Printing
Inks, Gravure Printing Ink, Offset Printing Ink, Screen Printing Ink,
Printing Packing Material.
3, Automotive
Coating, Car Coating.
4, Plastic
Coating, 3C Coating.
5, Clear and
pigmented woodcare applications, such as NC wood coatings, PU wood coatings,
unsaturated polyester wood coatings.
Strengths
1) We focus on silica matting agent market
about 25 years. Know exactly the customer`s requirements, have most experience
about this silica products, provide the best service to the customers.
2) We are the reliable supplier for many
countries and some International customers, such as AkzoNobel, Valspar, Nippon
Paints, Dgl Camel, and PPG.
Matting Agent For Industrial Coating,Decorative Coatings Silica,Carbon Black Silica Dioxide,Silica Dioxide Paint Matting Agent Guangzhou Quanxu Technology Co Ltd , https://www.skychema.com