Manufacturer LED Light Ipx4 Rain Proof Test Machine

June 10, 2023

Model NO.: YSRT-1728-A
Control: Controller
Weight: 100-500Kg
Power Source: AC220V
Oil Cylinder Position: N/a
Inner Size(mm): 1200*1200*1200
Exterior Size(mm): 1750*1850*1300
Standards: IEC60529
Total Waterflow(L/Min): IP*2,3-35mm/Min(in Drip Box)
Pressure of Spray Nozzle(Kgf/Cm*Cm): 0.07L/Min
Test Specimen Frame(Rpm): 17 Rpm
Warranty: One Year Free Parts Maintenance
Spray Nozzle Rotation Spees: 60, 90,180,360 Degrees
Material: SUS#304
Customization: Alailable
Trademark: Yuanyao Rain Test Chamber
Transport Package: Strong Wood Carton
Specification: CE, SGS, TUV certified.
Origin: Dongguan, China(Mainland)
HS Code: 9032100000

Manufacturer LED light ipx4 rain proof test machine


   Rain proof test machine is normally used for testing anti-rain or water-proof performance of material or products, such as steam locomotive lamps, wiper performance, waterproof bands, motorcycle instruments, defense industry, navigation systems, missiles, radar cone top, aerospace industry, etc.

Features

1. Water pressure and flow rate adjustable.
2. Unique sprinkler can stably control the rain quantity and pressure.
3. This equipment (Model B) can make the test products' temperature rising from RT-85° C.
4. Inner case's material is imported steel plates; Shell is made of #304 stainless steel.
5. This equipment applies rain spray test for products and parts.

Technical parameters: See the label.
 
Model YSRT-1728-A YSRT-1728-E(IEC-529)(CNS14165)
Internal Dim.W×H×D(mm) 1200×1200×1200 1200×1200×1200
External Dim.W×H×D(mm) 1750×1850×1300 1750×1850×1300
Water Temp. Normal Normal
Spray Type Total Water Flow(L/min) R1 1.8 IP×1 With in 1~1.5mm/min(In drip box)
R2 3.2 IP×2 With in 3~3.5mm/min(In drip box)
S1 24.5 IP×3 angle±600,R:400mm,1.1L/min
S2 39.2 IP×4 angle±1800,R:400mm,1.8L/min
Pressure of spray nozzle(kgf/cm*2) R1 0.1 1.Flow rate of the water=0.07L/min
2.1P×3,Radius:400mm,16Number or open
holes=16,total water flow:1:1L/min.
3.1P×4,Radius:400mm,25Number or open
holes=25,total water flow:1:8L/min.
*Radius:200mm,R400mm.
(For 1P×3,1P×4 only)
R2 0.3
S1 1
S2 3
(RPM)Test Specimen Frame 17RMP 1RPM
Spray Nozzle Rotation Speed 23RPM Promote the pipe on both sides of the vertical line of 30 ° each time back and forth about four seconds to promote
Swing 60 ° from vertical for 4 seconds at one time
Promote the pipe on both sides of the vertical line of 180 ° for about 12 seconds to promote one round
Swing 180 ° from vertical for 12 seconds at one time
Material Interior SUS#304
Exterior
Other Components Chamber lamp.Wiper
casters with Adjusters		 Chamber lamp.Wiper,casters with Adjusters
Power Source(K.W.) AC 1Ψ 220V 60/50Hz 4KW

I will appreciate that you can contact me for more details about ptoducts, and purchase!

Manufacturer LED Light Ipx4 Rain Proof Test Machine
Manufacturer LED Light Ipx4 Rain Proof Test Machine
Manufacturer LED Light Ipx4 Rain Proof Test Machine
 

Extrustion Blow Molding Machine

Blow moulding machines can be divided into three categories: extrusion blow moulding machines, injection blow moulding machines and special structure blow moulding machines. Stretch blow molding machines can be classified into each of the above categories. Extrusion Blow Molding Machine is the combination of extruder, blow molding machine and die closing mechanism, which is composed of extruder and blank die head, blow expansion device, die closing mechanism, blank thickness control system and transmission mechanism. The blank die is one of the important components that determine the quality of blow molding products, usually including the side feed die and the center feed die. The storage cylinder type blank die head is often used for large products during blow molding. The minimum volume of the storage tank is 1kg and the maximum volume is 240kg. The parison thickness control device is used to control the parison wall thickness. The maximum control point is 128 points, generally 20~30 points. The extrusion blow molding machine can produce hollow products with a volume range of 2.5ml~104l.

Injection blow molding machine is the combination of Injection Molding Machine and blow molding mechanism, including plasticizing mechanism, hydraulic system, control electrical apparatus and other mechanical components. Common types include three-station injection blow molding machine and four-station injection blow molding machine. The three-station machine has three stations for preforming, blowing and demoulding, each of which is separated by 120 °. The four-station machine has more pre-forming stations, each of which is separated by 90 °. In addition, there is a dual-station injection blow molding machine with 180 ° between stations. The plastic containers produced by the injection blow molding machine are accurate in size and do not need secondary processing, but the mold cost is high.

The special structure blow molding machine is a blow molding machine that uses sheet, molten material and cold blank as parison to blow mold hollow body with special shape and purpose. Due to the different shapes and requirements of the products produced, the structure of the blow molding machine is also different.

Extrustion Blow Molding Machine,Pe Extrustion Blow Molding Machine,Pet Stretch Blow Moulding Machine,Injection Stretch Blow Molding Machine

Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachinery.com