Ling Feng is a different kind of handsome Loading and unloading Speed ​​is efficient, it doesn't work. who is it? Ling Feng heroes Kobelco SK 1 4 0 Ling Feng heroes, five advantages At first sight, with you More fuel efficient ▷Use the same fuel as the previous generation model, and increase the 3% workload when in H mode ▶After a large amount of work, 10% fuel consumption is saved in S mode More efficient Continuous operation time extended by 37% The combination of the 275L high-capacity diesel tank and efficient fuel efficiency extends continuous operating time by up to 37% Excellent walking ability Walking speed: 3.4/5.6 km/h Walking traction: 139 kN{14.2tf} Increased rotational force and shortened excavation cycle Rotating torque: 39.9 kN Rotation speed: 11.0 min-1 safer Has a safety level equivalent to FOPS level 1. In addition to standard canopy guards, front and upper guards are also available. These units are easily bolted to standard cab brackets. More environmentally friendly ▷ Meet the third emission standards of Japan, the United States and Europe ▶ equipped with quasi-engine idle automatic stop function ▷Low noise reduction and low vibration including improved sound quality Standard configuration Engine: Mitsubishi D04FR-KDP2TAAC turbocharged, built-in intercooled engine Capacity and lubricant Fuel tank: 275L Cooling system: 14L Engine oil: 18.5L Travel reduction gearbox: 2X2.1L Rotary reduction gearbox: 1.65L Hydraulic fuel tank: 101L fuel tank capacity 172L hydraulic system Overall size Arm length: short arm 2.09m Overall length: 7,810mm Overall height (to the top of the boom): 2,730mm Overall width: 2,490mm Overall height (to the top of the cab) 2,870mm Tail ground clearance: 910mm Ground clearance (excluding track): 440mm Back end radius: 2,190mm Distance from the center of rotation to the tail: 2,180mm Front and rear wheel center distance: 3,040mm Track length: 3,750mm Track spacing: 1,990mm Upper frame width: 2,490mm Operating weight and ground pressure When equipped with a 2.38m standard arm and a 0.57m3 ISO standard bucket Form: contour tooth track Track width: 500mm Machine width: 2,490mm Grounding pressure: 39{0.40} kPa (kgf/cm2) Operating weight: 13,000kg Walking system Track: 46 pieces per side Walking speed: 3.4/5.6 km/h Walking traction: 139kN{14,200kgf} (SAE J 1309) Maximum climbing angle: 70% (35 degrees) Ling Feng heroes Kobelco SK140 Have it, the wind rises Wealth is with you! (This article is from Kobelco)
Cooling tower generally comes with water cooling type chiller, as heat rejection device used to transfer process water heat to the atmosphere.
Cooling towers are used in various industries such as power plants, chemical plants, paper mills, steel mills, refineries, oil & gas processing, and food processing. They are also used in many commercial buildings and large residential complexes, popular in HVAC systems for cooling and dehumidifying air.
Cooling Tower,Draft Cooling Tower,Power Plant Cooling Tower,Natural Draught Cooling Tower Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jiemaheatexchanger.com
