small injection molding machine small injection molding machine Shen Zhou Machinery Co., Ltd. , http://www.szmouldmachine.com
Features:Â
1.Low current and high efficiency minimize battery drain motor.
2. Low-profile design will fit ATV and UTV.Â
3. All metal construction enhances strength and long life.
4.Fully independent and automatic braking ensures safety and reliable braking system.
5. Proven design for resistance to severe environmental conditions water resistance.
6. Aircraft grade wire rope, or synthetic rope is optional.
7. Remote switch & wireless remote control being alternative.
8. Our products are of well-designed, beautiful appearance and easy to install.
Specification:
Â
Rated line pull:Â
2500Lbs (1134kgs) single line
Motor:
Permanent magnetic motor 1.5 hp /1.0kw,12V DC
Gear Train:
3 stage planetary
Gear ratio:Â
198:1
Clutch:
Sliding Ring gear
Braking action:
Automatic in the drum
Fairlead:
Aluminum hawse fairlead for synthetic rope
Synthetic rope:
5.0mm ×12m
Drum size:
334mm×114mm×120mm
Dimensions:Â
334mm×114mm×120mm
Mounting bolt pattern:
124mm×76mm
Battery:
Recommended 650 CCA minimum for winching 25 square mm,72"(1.83m)
N.W:Â
18 lbs (8kgs)
Packing:
440mmx250mmx220mm(1000pcs per 20' container)
Line speed and motor current (first layer)
Line pull
Lbs
0
1000
2000
2500
Kgs
0
454
907
1134
Line speed
FPM
24.5
14.7
10.5
6.9
MPM
7.5
4.5
3.2
2.1
Motor current
Amps
15
75
120
175
Line pull and cable capacity
Layer of cable
1
2
3
4
Rated line pull per layer
Lbs
2500
2000
1870
1680
Kgs
1134
907
849
760
Cable capacity per layer
Ft.
7.2
15.7
25.9
39
M
2.2
4.8
7.9
12
We can arrange you transportation, we have our own shipping and express company, or we can use your forwarder.
Â
How to choose a ZHME Winch for your vehicle
Can't decide which winch is right for you? The best way to choose is to calculate the line pull needed for the application. To do this multiply your vehicle's Gross Vehicle Weight (GVW) by 1.5 - this will give an approximation for how big your winch should be. Typically, the first layer of rope around the drum is the max load the winch is capable of. Each additional layer deducts about 10% off the rated line pull. So for a winch rated 9,500lbs, the second layer will pull 8,550lbs, the third 7,700lbs, etc. A loss of pulling power can also be experienced when the rope isn't spooled evenly on the drum. So re-spool your winch before you go out!
Â
Â