High Temperature Resistant Non Stick PTFE Coated Glassfiber Open Mesh Conveyor Belt

September 08, 2023

Model NO.: KC81
Origin: China
HS Code: 70195900

                                  PTFE mesh conveyor belt series

We select advanced imported loom,using high-quality imported glassfiber or Kevlar as basic weaving material, coated with excellent PTFE resin to make it into various PTFE mesh conveyor belts.

 High Temperature Resistant Non Stick PTFE Coated Glassfiber Open Mesh Conveyor Belt


Features of PTFE conveyor belts:
1. High temperature resistance--It can continuously work under-140 to 260ºC, max resist high temperature up to 360ºC
2. Air permeability--It can avoid wasting heat and improve drying efficiency.
3. Chemical resistance--It can resist all most of chemical medicines.
4. Non-Sticky--It can easily remove all kinds of adhesives such as resin, paint and chemical medicines.
5. Good flex fatigue resistance--It has high tensile strength and excellent flex fatigue resistance. It's better for small wheels

 High Temperature Resistant Non Stick PTFE Coated Glassfiber Open Mesh Conveyor Belt



Applications:
1.Drying machine for non-woven textile, textile printing, silk- printing and dyeing machine.
2.Shrinking machine for garment fabric, high-frequency and UV dryer.
3.Conveyor belt for hot-air dryer, various of food baking, quick-frozen machines.
4.Oiling machine for paper glazing and waxing, plant engineering.
5.Seperating sheet for hardboard production etc.

High Temperature Resistant Non Stick PTFE Coated Glassfiber Open Mesh Conveyor Belt

 
Model material mesh size Thickness weight Temp resistance Max Width Tensile Strength
6001 fiberglass 1x1mm 0.5mm 370g/m² -70-260ºC 4000mm 310/290N/cm
6002 fiebrglass  2x2mm 0.7mm 450g/m² -70-260ºC 4000mm 350/310N/cm
6004 fiberglass 4x4mm 1.0mm 400g/m² -70-260ºC 4000mm 390/320N/cm
6004B fiberglass 4x4mm 1.0mm 450g/m² -70-260ºC 4000mm 390/320N/cm
6007 fiberglass
+Kevlar		 4x4mm 1.2mm 600g/m² -70-260ºC 4000mm 895/370N/cm
6008 fiberglass 4x4mm 1.0mm 585g/m² -70-260ºC 4000mm 395/370N/cm
6008B fiberglass 4x4mm 1.0mm 585g/m² -70-260ºC 4000mm 395/370N/cm
6013 fiberglass 10x10mm 1.2mm 450g/m² -70-260ºC 4000mm 360/300N/cm
6015 fiberglass 0.5x1mm 0.5mm 420g/m² -70-260ºC 4000mm 310/290N/cm
6025 fiberglass 2*2.5mm 0.9mm 600g/m² -70-260ºC 3000mm 390/320N/cm

High Temperature Resistant Non Stick PTFE Coated Glassfiber Open Mesh Conveyor Belt

High Temperature Resistant Non Stick PTFE Coated Glassfiber Open Mesh Conveyor Belt

 

EVA Traction Pad

EVA Traction Pad is the tail pad to be sticked on the surfboard. It comes with center arch and kick tail, which allow surfers to control the direction and stability when surfing in the sea.

The design of surfboard traction pad can be in one piece, two pieces, or three pieces basically. The standard the classical texture for traction pad would be diamond like texture, as it can provide the stronger grip among all of them.

EVA Traction Pad
There are two ways to make the logo on the traction pad, one is PVC logo, the other one is EVA color connect logo.
EVA Traction Pad
PVC logo is a very simple idea, just make a PVC logo based on the design and insert it into the traction pad. One advantage of PVC logo is that it can be more detailed and complicated than the EVA color connect logo. And it can be repeatly used on other pads without any more setup tooling charge.

The EVA color connect logo is made along with the pad itself. Unlike the PVC logo, it is also EVA material same as pad, and also shows with the texture. The design of this logo can not be too detailed and small, it needs to be larger and simpler so that we can use the different color EVA material to connect them.

Eva Traction Pad,Non-Skip Traction Pad,Traction Pad,Surfboard Tail Pads,Grip Tail Pad,Eva Tail Pad

Huizhou City Melors Plastic Products Co., Limited , https://www.foampioneer.com