Sprinklers are already one of the sanitation special vehicles. Urban sanitation must have a sprinkler to help clean, spray, cool, and other uses. In the process of using the sprinkler, it is sure to encounter various problems. These problems will directly affect its use, so we must be able to understand clearly. The following Xiaobian has found some common problems in the use of sanitation special sprinklers , we can take a look. Frequently Asked Questions about Sanitation Special Sprinklers 1. How much watering is appropriate? When using a watering vehicle, I feel that the amount of watering should be greater, so that more plants can be watered; in fact, the larger the amount of water is, the better, if the amount of water is too large, there may be water leakage. The problem is that there is a waste of water; if the amount of water is too large, it may lead to the occurrence of water in the area, which will affect the use of pedestrians. However, if the amount of water is too small, water can not be effectively watered and the obvious effect will not be achieved. Therefore, it is necessary to ensure that the amount of water sprayed on the sprinkler is used properly. The specific amount should be determined according to the specific requirements. 2, the width of the sprinkler can be increased. Most of the sprinklers have a width of 14-16m. In the past, this size was far enough for use. However, after the road has been widened, the width of the sprinkler, which is 14-16m, is insufficient and it may cause poor watering effect. Plant watering does not occur. If the width of the sprinkler is not enough, the water pressure and the pump head will increase to increase the width. This will increase the cost of use. Therefore, to increase the width of the sprinkler, it is best to make the width of the sprinkler high. At 20 meters. There are still many common problems in the use of sanitation sprinklers , but they cannot be introduced completely because of the length of the article. Before using the special sprinkler for sanitation , it is best to understand in detail, so as to avoid trouble in the course of faults during the procedure. When using a water truck, it is also necessary to pay attention to the safety of surrounding pedestrians. The speed of watering in densely populated areas should be reduced to avoid hurting the passing pedestrians and affecting their personal safety.
In industrial manufacturing or life, you will see many brass parts, most of which are made by investment casting. For example, many accessories such as brass jewelry, brass pendants, brass ornaments and so on that are common in our lives are produced by investment casting. The casting performance of brass in copper alloys is relatively good, but its shrinkage is relatively large, and it is prone to shrinkage holes, cold cracks, deformation and other problems. It is necessary to reduce the pouring temperature as much as possible in the actual pouring to improve this problem. Of course, there are many other processes to improve this shortcoming, such as selecting a good sand mold, setting a riser, or setting a gating system, etc., which can be improved, and the details are discussed and analyzed according to the structure of the workpiece.
Brass casting is not only used in jewelry, pendants, ornaments and other handicrafts in daily life, but also widely used in industry, because copper itself has good corrosion resistance and superior conductivity. There are also many brass castings produced by SCZY. The common ones are some handicrafts, some architectural accessories, and auto accessories. We also support secondary precision CNC machining and surface treatment. Let customers have no worries.
Brass Casting Parts,Brass Investment Castings,Brass Investment Casting Parts,Brass Lost Wax Casting Parts,Brass Castings,Brass Casting Shenzhen SCZY Technology Co.,Ltd , https://www.szsccasting.com
