Aluminum Round Pipe used for chair leg. We have been exported our Aluminum Round Pipe to African countries for years. Aluminum Round Pipe,Aluminum Chair Leg,Aluminum Round Pipe For Chair,Chair Leg Pad Dovin limited , https://www.dovinmachine.com
2. Adjust the height of the roller, then empty the car and turn it for inspection.
3. Pay attention to the concentration of the operation, pay attention to whether the sound of mechanical operation is normal, and it is forbidden to laugh with others. When multiple people work at the same time, they must have special personnel responsible for the unified command, and the commander should pay attention to the safety of other people.
4. It is forbidden to stand on the steel plate when feeding. The operator should stand at the front when discharging. Do not use hands to support the sheet to follow in order to prevent bumps or cuts.
5. The surface of the steel plate to be leveled must not contain sediment, overlaps, bumps, gas welding slag, grease, and the like.
6. Correcting small pieces of material should be done on large pieces of material.
7. Work aids are forbidden to put tools so that they do not get caught in the rollers.
8. If there is a temporary power outage during work, the power must be turned off immediately.
9. After the work is completed, the upper shaft roller should be dropped or flattened.
Flat machine safety operating procedures
1. Before operation, check whether the hydraulic protection devices of the various parts of the equipment are complete and whether the screws of the various parts are tight, whether the oil cups, tubing, and oil are complete, and whether the rotating parts and electrical switches are safe and normal.