Combined Flow Closed Cooling Tower
Closed Cooling Tower is operated by circulating water or fluid, which is divided into two closed loops.
1. Circulation in the tower: the circulating water or fluid passes through the hot zone environment. After the water temperature rises, it enters the surface cooler in the tower, and the heat is sent to the environment outside the tower through the surface cooler and ventilation fan. The cooled circulating water or fluid is sent to the heat source by the water pump.
2. Circulation outside the tower: the spray water is sent to the spray system by the water tank through the water pipe. After spraying, the spray water first exchanges heat with the filler, so that the spray water can be cooled rapidly. At this time, the water contacts the surface of the surface cooler for heat exchange. Part of the hot steam is discharged through the ventilation fan, and the cooled spray water drops to the water tank for secondary circulation to form an external circulation for cooling.
Combined Flow Closed Cooling Tower,Bac Cooling Tower,Cooling Tower Systems,Chiller Tower Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhou-arkfluid.com
It is reported that the automobile branch of Dongfeng Motor Co., Ltd. produced 12,548 cars in February and accumulated more than 20,000 cars in the first two months.
Since the beginning of this year, the automotive subsidiary has focused on benchmarking, established a benchmarking system for benchmarking factories in terms of quality, efficiency, cost, and assembly assurance, focused on breakthroughs in key links that restrict the improvement of operational quality, and established the “production system process optimization†and “fine processing technologyâ€. Quota, reduce raw material consumption, and "more than half of outsourcing work stoppages," and more than 10 value-added issues.
In the high-yield month of February, the automobile branch not only satisfies high quality and high efficiency, but also meets sales demand at the lowest cost.