Dn50-500 Woltmann Water Meter Spare Parts Water Meter Mechanism

April 08, 2024

Model NO.: C150
Principle: Volumetric Meter
Medium Pressure: General Water Meter
Work Environment: Dry Water Meter
Stucture: Traditional
Trademark: cixier
Transport Package: Paper Carton
Origin: China
HS Code: 9028201000
Mechanism for woltmann type multi jet water meters from DN50-300
class B R80 or R100

Multi-jet Dry Type Vane Wheel Water Meter
It is a multi-jet super dry water meter for residential 
application in sizes 15mm-20mm for cold  and hot meter.

Features
Compact design with smaller meter body.
Brass body is only 570g weight for save cost
45° inclined register, hot wire tamper proof.
Magnetic drive mechanism with anti-magnetic protection.
External regulation device

Standards Compliance 

Directive 2004/22/EC on measuring instruments; 
the European  Standard EN14154+A1+A2: Water Meter; 
the International  Organization of Legal Metrology OIML R-49: 2006(E)

Optional Features 
Several lengths and connections available on request
Non return Valve
Reed switch option

Working Conditions
Water temperature: ≤50ºC for cold water meter  
                                    ≤90ºC for  hot water meter 
Water pressure:   ≤1MPa or 1.6MPa optional
                  (10bar or 16bar option)

Accessories
Each meter has one set coupling optional: 2pcs coupling, 2pcs coupling nuts and 2pcs washers.

Installation requirements
The meter should be installed in horizontal position with the direction of the flow as 
indicated by the arrow cast in the meter body with the register face upwards.
Pipeline must be flushed before installation.
The meter should be constantly full of water during operation.

Maximum Permissible Error
In the lower zone from Qmin inclusive up to but excluding Qt is ±5%.
In the upper zone from Qt inclusive up to and including Qs is: cold water meter ±2%.MID Certificated Multi Jet Dry Type Brass Water Meter
DN(mm)   15 20
Size(inch)   1/2" 3/4"
Q4(m³/h)   3.125 5
Q3(m³/h)   2.5 4
R80 Q2(l/h) 50 80
  Q1(l/h) 31.25 50
R100 Q2(l/h) 40 64
  Q1(l/h) 25 40
Max.Reading (m³) 9999
Min.Reading (Liter) 005
Max.Pressure (bar) 16
Pressure Loss (ΔP) 63
Max.Temperature T30 or T90


 

Low-Pressure Transmission Parts

This classification mainly includes the aluminum low-pressure casting Machinery Parts using in Transmission area.
Normal raw material: A356.ZL101A.ZL101.AlSi7Mg
The pressure on the surface of the molten metal is 0.06~0.12Mpa.This processing has good shrinkage, casting tissue is dense, easy to produce the large thin-walled complex parts, the casting head is not needed , metal yield can be up to 95%.
Process Technology: Low-pressure casting,T6 Treatment,Shot Blasting,NC Machining,Spray Coating
Product Dimensions: Customized
Casting General Tolerance: Grade GBT6414-CT8
Flow Processes: Die casting, Degating to remove the residual of the gate, Polishing and Deburring to remove the burrs, Polishing to remove the parting line, flash,CNC Turning, Cleaning, Packaging, Storaging, Shipping
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection, and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage, Screw Gauge
Application: Machinery Parts
Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Lead Time: 30-35 days
Trade Term: FOB Ningbo

Aluminum Low-Pressure Transmission Parts,Al Low-Pressure Casting Transmission Parts,Low-Pressure Casting Transmission Parts

NINGBO ZHENHAI BOLANG METAL PRODUCTS FACTORY , https://www.bolangautoparts.com