Equipments Request Components 1. Milling System Malt Miller 2. Mashing System Mash/Lauter Tun Boiler kettle and whirlpool tun. Steam heating Boiler,electrical heating boiler, gas heating boiler,diesel boiler. Plate heat Exchanger Wort Pump/mash pump Stir Device (Optional,flase bottom) Other accessories are available: 1. Ornamental Pipe;2.Mashing Pipeline; 3. Yeast Feeder; 4. Venturi Tube; 5. Butterfly Valve DN40; 6. Butterfly Valve DN32; 7. Soft Pipe; 8. Dregs Rake; 9. Sugar Measuring Cylinder; 10. Saccharimeter; 3. Fermenting System Fermentation Tank Other accessories are available: 1. L-Pipe; 2. Butterfly Valve; 3. Pressure Gage; 4. Solenoid Valve; 5. Vacuum Valve; 6. Cooling Pipe; 7. Thermal Insulation Pipe; .8.PVRV;9. 4. Cooling System Ice Water Tank Refrigeration Machine Centrifugal Pump Evaporator Ice Water Pump Relative Pipes and Valves 5. CIP System Washing Tank Sterilization Tank Pump and Valve 6. Filter System Kieselguhr Filter Membrane Filter Filtered Beer Tanks 7. Packing System Fresh Keg Packing Machine Pop Can Packing Machine Glass Bottle Packing Machine 8. Controlling System Mashing Control Panel Fermenting Control Panel Refrigerating Control Panel Our products have been exported to all of the world, such as USA, Canada, Mexico, Peru, Costa Rica, Chile, France, Belgium, UK, Singapore, Korea, Australia etc. So we are confident to meet your needs. Now, please follow me to see more details about our products.:) The 50L beer brewing equipment is widely used in pub, laboratory, home. The configuration is flexible depending on different working efficiency: Brewhouse combination is flexible according to your needs and daily work shift. In general, there is just one main tank, mash,lauter, kettle and whirlpool function all in this tun, heating is electric. Fermenter quantity will depend on beer daily output and beer fermentation cycle. Control system we have 2 type, PLC control and Digital control system. Our company is a professional beer equipment manufacturer, our engineers have more than 10 yearsexperience in brewing equipment field . We are specialized in professional design, manufacture, installation and commissioning of various beer equipments and supporting facilities. Our products include mashing equipment, fermentation equipment, yeast spread cultivation equipment, and refrigeration equipment for small and medium-sized brewery, hotel, pub and etc. Special equipments are acceptable, and also we can do the OEM for you, any questions, suggestions about our equipments, please feel free to contact us!  It is the Stainless Steel 304. Most of the suppliers are quoting with 3mm interior shell and 2mm exterior shell. In fact, the real thickness is only 2.5mm and 1.5mm. Â
Definition of Blow molding
Blow molding is a common process for production of hollow containers, ranging from commodity products such as soda or water bottles to highly engineered products such as gas tanks and electrical enclosures. The two most common types of blow molding are extrusion blow molding and injection blow molding with many variants related to handling of the parison and molds.
Blow molding processes:
Three main types of blow molding
l Extrusion Blow Molding
u Take melted plastic
u Extrude the parison with compressed air into the mold
u Features two variations: continuous and intermittent
l Blow Molding
u Produce small medica and single-serve bottles
u Large quantities of hollow glass and plastic objects
u Via pin to blow air into mold to inflate and cool the product
u Restriction on the bottle design, only allowing a champagne base to be made for carbonated bottles.
Injection stretch molding
Injection stretch molding is suitable for cylindrical, rectangular, or oval bottles and has two different main methods, notably the single-stage and two-stage processes
With the single-stage method,
the same machine is used to both preform manufacture and bottles blow the object. This method is highly suitable for low volumes and short runs
In the case of the two-stage process,
the plastic is first molded into a [preform" using the Injection Molding process. The [preforms" are then packaged and fed after cooling into a reheat stretch blow molding machine. While a high capital cost and a large floor footprint are necessary, injection stretch molding can produce very high volumes and feature minimal restrictions on bottle design. The bottles can also be a completed item for a third party to blow
Materials: PE, PVC, PC, PP, PS
Applications:
l To produce bottle-shaped, hollow thin-wall molding products and bulky products, such as seasoning, water bottles, cleaning agents, shampoo and other packaging supplies
l And produce trash cans, gasoline cans, and even the capacity of up to a ton of chemical barrels and fishing products transport boxes
Advantages
l Thin wall forming products, materials and cost saving
l Low cost of mold, rich mold materials
l Can produce large, complex shape hollow products
Disadvantages
l Low dimensional accuracy
l Thickness of the forming product wall is difficult to control and easy to have uneven problem
l Product surface is prone to flow marks, rough but not delicate
Injection Blow Moulding,Injection Blow Moulding Machine,Plastic Injection Blow Molding Machine,Blow Molding Injection Molding Suzhou FCE precision electronics Co., LTD , https://www.fukeyifcesz.com
Brewing system vessel initial configuration:
Â
 
Â
Cooling system including glycol water tank, pump and chiller. The big cooling capacity used in heat exchanger, for cooling wort.
Accessories pictures:
We are directly supplier :
Â
Equipment Welding and Polishing:
The material of the stainless steel.
Some factories are using 201 which is not food grade. And as a customer, it is not easy to test it.
Only when the 201 get rust, you will find it. But it is too late.
Now each batch of our steel plate will be randomly cut one part to be tested in our authoritative lab (government institute) and have the certificate for the material.
Not only the steel plate (sheet), but also the valves, pipes, bolts etc.
The thickness of stainless steel.
You may find the thinner sheet(plate) will easily distort after welding because of the high temperature.
3mm and 2.5mm, that is about 16% difference in weight. So this part is what customers can not test.
We have the stainless steel quality certificate and also we usually take the samples to test it from the government. We ensure its quality.
FAQ:
1. Package details:
Â
Polyethylene composite foam pad/ tray or container
Â
2. After closing the agreement that the deadline has.
Â
We send you the P/I and Contract. Bill of Lading and policy of insurance send to you by international express for free charge.
Â
3. certificate of origin
Â
Certificate of Origin can be supply for free charge.
Â
4. It has certificates of product quality.
Â
we can provide free third-party quality testing certificate: CE certificate and SGS certificate.
Â
5. What means of payment accepted for the transaction.
Â
We accept 30% T/T advance, the rest payment arrange before the shipping.
Western Union, Visa  also accept.
Â
Commercial Micro Beer Brewing Equipment for Sale
Model NO.: ZD-1000L
Warrant Time: 5 Years
After-Sales Service: Engineers Overseas Services Available
Material Thickness: 2-3mm
Heating Way: Electricity Steam Fire
Control System: Semi-Automatic
Payment Way: 30% Pre-Payment
Delivery Time: 50 Days
OEM: Accept Customer Design
Product Vessel: 2/3/4/5 Vessels Can Be Supply
Certificate: Ce and TUV Certificate
Trademark: Zhuoda
Transport Package: Standard Wooden Box or Container
Specification: Customized
Origin: China
HS Code: 84384000
Commercial micro beer brewing  equipment  for saleÂ
2. Production details:
Introduction :