Combined Flow Closed Cooling Tower
Closed Cooling Tower is operated by circulating water or fluid, which is divided into two closed loops.
1. Circulation in the tower: the circulating water or fluid passes through the hot zone environment. After the water temperature rises, it enters the surface cooler in the tower, and the heat is sent to the environment outside the tower through the surface cooler and ventilation fan. The cooled circulating water or fluid is sent to the heat source by the water pump.
2. Circulation outside the tower: the spray water is sent to the spray system by the water tank through the water pipe. After spraying, the spray water first exchanges heat with the filler, so that the spray water can be cooled rapidly. At this time, the water contacts the surface of the surface cooler for heat exchange. Part of the hot steam is discharged through the ventilation fan, and the cooled spray water drops to the water tank for secondary circulation to form an external circulation for cooling.
Combined Flow Closed Cooling Tower,Bac Cooling Tower,Cooling Tower Systems,Chiller Tower Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhou-arkfluid.com
Â
Brief Introduction:
Hydraulic Automatic Two Rolling Plate Rounding Machine, the upper rolling is steel shaft, the under rolling is steel mandrel with stretchy rubber, adjust the distance between two rollings, when we start the machine, the rubber shaft will move down to the mandrel by two hydrocylinders. At the same time, due to the elastic distortion of rubber shaft, the steel plate will happen plastic distortion too.
Forming Principle:
Machining Results:
Advantage:
* Automatic taking out the cylindrical product
* Easy operation(manumotive/automatic/emergency-stop and etc), only need one worker.
* Once shaping
* Good roundness and etc.
The mandrel can be designed according to your requirements.
Â
Main Technical Data:
Machining Material
Carbon/Stainless Steel
Diameter Tolerance
±0.5mm
Machining Diameter
¢100mm~¢750mm
Seam Width
5mm~10mm
Machining Effective Length
200mm~500mm
Axial Malposition Tolerance
±0.5mm
Plate Thickness Range
0.8mm~4mm
Â
Â
Workshop:
Another Series:
Â
Â
Â
Cold Plate Roll Bending Machine
Model NO.: R2M-500-II
Color: According to Customer′s Request
Rate of Production: 3-12 PCS/Min
Machining Diameter Tolerance: +/-0.5mm
Air Pipe Diameter: 10mm
Time of Change Mould: Less Than 10 Minutes (One Worker Operate)
Feeding Plate Location Set: Yes
Working Temperature: -5 & +65 Degree Centigrade
Delivery Time: 25 Working Days After Advance Payment
Trademark: FJC
Transport Package: Wooden Case with Soft Film Layer
Specification: 500
Origin: China
HS Code: 8462219000