Easy-to-use refractory anchor bricks. Including the anchoring brick body, the middle of the left side of the upper surface of the anchoring brick body is provided with a triangular prism-shaped hanging groove, one of the side surfaces of the hanging groove is located on the upper surface of the anchoring brick body, and one of the bottom surfaces of the hanging groove is located on the right side of the anchoring brick body. The lowermost end of the hanging groove is provided with hanging holes penetrating the left and right ends of the anchor brick body. By implementing the present invention, the following beneficial technical effects can be obtained: the hanging piece is connected to the hanging hole through the hooks on both sides, and the refractory anchor brick can be rotated relative to the hanging piece through the setting of the hanging groove, but the rotation is restricted by the hanging groove , making the refractory anchoring brick more convenient to use, improving the service life of the refractory anchoring brick and reducing the material of the anchoring brick; when the hanging piece rotates to the limit position, the hanging groove and the hook are close to each other, and the contact area is large, preventing the hanging piece and the refractory anchoring brick from being damaged. Brick Anchor,Anchors For Coolers,Refractory Brick Anchors,316 Stainless Steel Refractory Anchor Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.com
 I. Technical parameter:Â
1. Output paper: tissue paper; toilet paperÂ
2. Raw material:recycle paper,wood pulp board
3. Capacity: 1-15 tons per day
4. Net paper width: 787-3,250mm
5. Width of working face: 1,100-3,650mmÂ
6. Paper weight: 13-30g/m2
9. Rail gauge: 1,300-4,300mmÂ
10. Drive way: AC frequency converter speed adjusting, section drive.
11.Layout type:left or right hand machine.
II. Main structure for paper making machine
1. Cylinder mold part:1set of stainless steel cylinder mold,1set of couch roll , coated by rubber,Â
rubber hardness 38±2SR.. Cylinder vat is made from stainless steel plate.
2. Dryerpart:1 set of of alloy dryer cylinder, 1set of touch roll, coated by rubber,rubberÂ
hardness 90±2SR., equipped with double layer exhaust hood, with 2 sets of automatic scraper knife,
pneumatic loading device.
3. Winding part:winding cylinder 1 set.
4. Paper converting section:1 set of rewinding machine with perforating and embossing, 1 set of Paper Cutting Machine,1 set of Plastic bag sealing machine.
III. Main equipment list for paper production lineÂ
No.
Item
Function
1
Stainless steel cylinder mold
Extract the pulp fiber to felt
2
Alloy dyer cylinder
dry the wet paperÂ
3
Exhaust hood of dryer cylinder
To cover the dryer and collect the hot & moist air
4
Axial-flow ventilator
To ventilate and pull out the hot & moist air in the exhaust hood
5
Roots vacuum pump
To provide the vacuum force for the suction box
6
Vacuum suction box
To absorb the water in the wet paperÂ
7
Air compressor
To provide the compressed air for the pneumatic device
8
Frequency conversioncontrolling cabinet
To control the running speed of the machine
9
High concentration hydra-pulper
break the recycle paper into pulp
10
High frequency vibrating screen
To separate and remove the small  impurity in the pulp
11
Impeller
To stir the pulp and make sure the pulp and water mixed well
12
Pressure screen (Slotted screen)Â
To make the pulp more finerÂ
13
Bleacher (include drive part)
To whiten the pulp through bleaching
14
Pulp refiner
To make the pulp much finer and smoother
15
Low concentration sand remover
To remove the sand and impurity in the water and pulp
16
Pulp pump
provide the pulp for the needed machine
17
Electrical operation cabinet
To control the machines run or stop
18
Boiler
To provide the hot steam for the dryers
 (1)Thermal paper coating machine
 (2)Carbonless/NCR paper coating machine
 (3)Glass paper coating machine
 (4)Duplex board paper coating machine
2.Paper making machine:
  (2)Toilet paper machine(Tissue paper machine)
  (3)Slanting sanitary paper machine
  (5)Office paper,A4 Paper making machine
5.Carbonless paper and Paper coating chemicals for NCR,thermal paper and so on:
6.Paper coating technical services.
7.Equipment modification and updating
3. About our cooperation of customers and exhibition:
Our company is specially working on paper making machine ,paper coating machine and coating technology in china.Now our paper machine have exported to Egypt.Mexico,Austrilia,Iran and other country.Meanwhile our chemicals engineer have more than 20 years paper coating experience,so we not only can supply the paper coating machine but also include the Coated paper (Thermal paper,Carbonless Paper ,Duplex board paper and so on) producing technology and coating chemical materials.
Services:1. We have export overseas equipment installation experience.
     2..Our company has professional r&d team, and we have professional engineers and technical personnel, to provide after-sales service and equipment installation. In addition also provides equipment parts, all aspects of serious service for our customers.
5. About the packing and shipping
Â
Automatic Paper Plate Making Machine Price
Model NO.: customized
Condition: New
Trademark: JRX
Transport Package: Wooden Case
Specification: 9mx5.5mx6m
Origin: China
HS Code: 8439100000
Automatic Paper Plate Making Machine Price
1. Product Description:1. Paper coating machine:
 (5) Sublimation tranfer paper coating machine
 (6)Cast coating machine for high-gloss digital photo paper and inkjet paper
 (7)Decorate Paper Printing and Coating Machine
 (8)Silicon oil paper coating machine
  (1)Kraft paper making machine
  (4)Fourdrinier paper making machine
4. About our company and special services:(6)Carboard paper making machine
3. Corollary equipment for paper making&coating machine:
4.NCR paper ,Carbonless paper