12V DC Single Acting Hydraulic Pump Power Unit Pack (Tipper/Trailer) with 5L Tank

November 08, 2022

Model NO.: 5LCZYYBDZY0000001V0
Trademark: none
Transport Package: Carton
Specification: 60*31*29cm
Origin: China
Model NO.: 5LCZYYBDZY0000001V0
Trademark: none
Transport Package: Carton
Specification: 60*31*29cm
Origin: China
Product Introduction:

This power unit comes standard in many dump trailers and is a direct replacement for most power-up/gravity-down applications. It's high quality starter ensure long life and a fast start every time, the motor is built to last, and the tank has been specifically designed to not crack & leak under harsh conditions.
Equipped with a high pressure gear pump, a DC motor, a multi-functional manifold, valves and tank, this power unit has a power up - gravity down circuit. The complete hydraulic unit provides 4 l / min at 180 bar. The unit has a 5 ltr. Oil container and can be used horizontally or perpendicularly. The power switch allows convenient operation for up and down. It is simply connected to the unit with the supplied plug. The single-acting hydraulic unit is controlled via the remote controller and the pump pressure. Start the motor to lift the machine, and the lowering movement is activated by the solenoid valve with the lowering speed controlled by the pressure compensated flow control valve. It is widely used in tipper trailer, fork lift and scissor lift applications.

Hydraulic Fluid:

ISO viscosity grades 22 to 46 are recommended. Anti wear, anti-foaming & rust inhibitor additives are recommended.
For colder climates ATF can be used.
In extreme cases Mil-5606 fluid can be used.
Do not use synthetic, biodegradable or water base hydraulic fluids. In most cases these fluids are not compatible with Buna O-rings. Please check fluid compatibility before use.
Tractor hydraulic fluid is not recommended. Most tractor hydraulic fluid has to high of a viscosity & may not be compatible with Buna O-rings.

Recommended Fluid Maintenance:

Change hydraulic fluid after initial 100 hours of operation.
Change hydraulic fluid every 1500 hours or 1 years there after.
Check hydraulic fluid level regularly before operation.

Areas of Application:

  • Tail lift, trailer/tipper, hand operated lift stacker, scissor lift platform, aerial platform, etc.

Features:
  • Single acting
  • 12v DC hydraulic power unit
  • 2.1cc/rev hydraulic pump
  • 2kw 12v DC electric motor c/w start relay and thermal protection
  • High strength plastic clip on motor cover
  • 2 button pendant c/w connector and 6M cable
  • High strength plastic pendant holster
  • 12v DC lowering valve and coil
  • Max pressure 220 bar
  • 3/8" BSP Port size
  • 5 Litre thermoplastic tank c/w filler breather
  • Adjustable relief valve set at 160 bar
  • Max flow achievable is 4 LPM @ 180 bar
  • SAE # 6 Port, horizontal mounting
  • Pump pressure can be adjusted
  • Power up / gravity down
  • Remote operated - Remote Included
  • Perfect for dump trailers - Lift Gates
  • Perfect replacement pump for 12VDC remotely controlled hydraulic systems
  • Fluid choice determined by operating environment/temperature

Technical:
  • Power supply: 12 Volt
  • Engine power: 2.0 kW
  • Pump flow rate 180 bar: 4 l / min
  • Liter capacity per minute max.: 10 l / min (pressureless)
  • Max. Pressure: 220 bar(22Mpa)
  • Cable outlet: 3/8 inch BSP
  • Tank capacity: 5 L
  • Motor speed: 2850 rpm
  • Pump displacement: 2.1cc/rev
  • Ports: SAE6
  • Mounting: Universal, compatible with most lifts
  • Recommended fluid viscosity: ISO Viscosity Grades 22-46mm²/s (cSt @ 40°C 22-46mm²/s; cSt @ 100°C 4-8mm²/s)
  • Packing size: 23"x13"x12"(56x32x30cm)
  • G.W.: 29lbs(13kg)

Packing Content:
  • 1 X Hydraulic Unit 12 V - 2000 W with 5 Ltr Tank
  • 1 X Power Switch
  • 1 X Instruction Manual





Company Information:
Welcome !
VEVOR Machinery Equipment Co., LTD. mainly engaged in cross-border business for 10 years. At present,
the company operates more than 10000 kinds of products with more than 200 employees. We are dedicated to offering you an unrivalled choice of products with lowest price and best quality.
More important, we own ten more warehouses in the world, which located in 3 continents.There are logistics warehouses in Los Angeles, Germany.
Our factory locates in 215417,Taicang, Jiangsu, China. And our sales branch company locates in the Shanghai. Welcome to visit our company.
Quality Certificate:

All the product are pass ISO9001. And most of products have CE certification.
Shipping:
Most of our product can be shipped within 7 days after payment
Warranty:
Directly manufacturer fully gurantee for 2 years
 
    Product Introduction:

    This power unit comes standard in many dump trailers and is a direct replacement for most power-up/gravity-down applications. It's high quality starter ensure long life and a fast start every time, the motor is built to last, and the tank has been specifically designed to not crack & leak under harsh conditions.
    Equipped with a high pressure gear pump, a DC motor, a multi-functional manifold, valves and tank, this power unit has a power up - gravity down circuit. The complete hydraulic unit provides 4 l / min at 180 bar. The unit has a 5 ltr. Oil container and can be used horizontally or perpendicularly. The power switch allows convenient operation for up and down. It is simply connected to the unit with the supplied plug. The single-acting hydraulic unit is controlled via the remote controller and the pump pressure. Start the motor to lift the machine, and the lowering movement is activated by the solenoid valve with the lowering speed controlled by the pressure compensated flow control valve. It is widely used in tipper trailer, fork lift and scissor lift applications.

    Hydraulic Fluid:

    ISO viscosity grades 22 to 46 are recommended. Anti wear, anti-foaming & rust inhibitor additives are recommended.
    For colder climates ATF can be used.
    In extreme cases Mil-5606 fluid can be used.
    Do not use synthetic, biodegradable or water base hydraulic fluids. In most cases these fluids are not compatible with Buna O-rings. Please check fluid compatibility before use.
    Tractor hydraulic fluid is not recommended. Most tractor hydraulic fluid has to high of a viscosity & may not be compatible with Buna O-rings.

    Recommended Fluid Maintenance:

    Change hydraulic fluid after initial 100 hours of operation.
    Change hydraulic fluid every 1500 hours or 1 years there after.
    Check hydraulic fluid level regularly before operation.

    Areas of Application:

    • Tail lift, trailer/tipper, hand operated lift stacker, scissor lift platform, aerial platform, etc.

    Features:
    • Single acting
    • 12v DC hydraulic power unit
    • 2.1cc/rev hydraulic pump
    • 2kw 12v DC electric motor c/w start relay and thermal protection
    • High strength plastic clip on motor cover
    • 2 button pendant c/w connector and 6M cable
    • High strength plastic pendant holster
    • 12v DC lowering valve and coil
    • Max pressure 220 bar
    • 3/8" BSP Port size
    • 5 Litre thermoplastic tank c/w filler breather
    • Adjustable relief valve set at 160 bar
    • Max flow achievable is 4 LPM @ 180 bar
    • SAE # 6 Port, horizontal mounting
    • Pump pressure can be adjusted
    • Power up / gravity down
    • Remote operated - Remote Included
    • Perfect for dump trailers - Lift Gates
    • Perfect replacement pump for 12VDC remotely controlled hydraulic systems
    • Fluid choice determined by operating environment/temperature

    Technical:
    • Power supply: 12 Volt
    • Engine power: 2.0 kW
    • Pump flow rate 180 bar: 4 l / min
    • Liter capacity per minute max.: 10 l / min (pressureless)
    • Max. Pressure: 220 bar(22Mpa)
    • Cable outlet: 3/8 inch BSP
    • Tank capacity: 5 L
    • Motor speed: 2850 rpm
    • Pump displacement: 2.1cc/rev
    • Ports: SAE6
    • Mounting: Universal, compatible with most lifts
    • Recommended fluid viscosity: ISO Viscosity Grades 22-46mm²/s (cSt @ 40°C 22-46mm²/s; cSt @ 100°C 4-8mm²/s)
    • Packing size: 23"x13"x12"(56x32x30cm)
    • G.W.: 29lbs(13kg)

    Packing Content:
    • 1 X Hydraulic Unit 12 V - 2000 W with 5 Ltr Tank
    • 1 X Power Switch
    • 1 X Instruction Manual





    Company Information:
    Welcome !
    VEVOR Machinery Equipment Co., LTD. mainly engaged in cross-border business for 10 years. At present,
    the company operates more than 10000 kinds of products with more than 200 employees. We are dedicated to offering you an unrivalled choice of products with lowest price and best quality.
    More important, we own ten more warehouses in the world, which located in 3 continents.There are logistics warehouses in Los Angeles, Germany.
    Our factory locates in 215417,Taicang, Jiangsu, China. And our sales branch company locates in the Shanghai. Welcome to visit our company.
    Quality Certificate:

    All the product are pass ISO9001. And most of products have CE certification.
    Shipping:
    Most of our product can be shipped within 7 days after payment
    Warranty:
    Directly manufacturer fully gurantee for 2 years
     

      Powder Metallurgy

      Powder metallurgy is an industrial technology that produces metal powder or uses metal powder (or a mixture of metal powder and non-metal powder) as a raw material, after forming and sintering, to produce metal materials, composite materials and various types of products. Powder metallurgy technology has been widely used in the fields of transportation, machinery, electronics, aerospace, weapons, biology, new energy, information and nuclear industry, and has become one of the most dynamic branches of new materials science. Powder metallurgy technology has a series of advantages such as significant energy saving, material saving, excellent performance, high product precision and good stability, which is very suitable for mass production. In addition, some materials and complex parts that cannot be prepared by traditional casting methods and mechanical processing methods can also be manufactured by powder metallurgy technology, which has attracted the attention of the industry.

      Powder Metallurgy,Sintering In Powder Metallurgy,Powder Metallurgy Process,Powder Metallurgy Parts

      Ningbo Huilexin Technology Co.LTD , https://www.oemshockabsorbers.com