1.5 Ton Electric Hydraulic Used Electric Pallet Stacker, Forklift, Hand Truck with

June 28, 2024

Lift height: 1000-3500mm
Condition: New
Trademark: YANCHA
Transport Package: Pallet+Package
Specification: 1800*980*2080
Origin: Taizhou(China)
HS Code: 8427109000
Semi-electric stacker with cheap price but excellent quality
 
Details

1.Stable moving speed.

1.5 Ton Electric Hydraulic Used Electric Pallet Stacker, Forklift, Hand Truck with
 
2.Foot brake
1.5 Ton Electric Hydraulic Used Electric Pallet Stacker, Forklift, Hand Truck with
3.Optional color & Beautiful paitings
1.5 Ton Electric Hydraulic Used Electric Pallet Stacker, Forklift, Hand Truck with
4.Customized fixed legs
1.5 Ton Electric Hydraulic Used Electric Pallet Stacker, Forklift, Hand Truck with

Features

1.Raise and lower using batter power (included)
2.Heavy duty C section mast frame for extra strength
3.Ergonomic safety control handle for one-hand operation
4.Built-in digital battery level gauge
5.Manual handle for steering.
6.Adjustable forks can handle most standard pallets
7.Parking brake for safe raising and lowering
8.Protective screen
9.Rear nylon wheels with protectors
10.Front nylon wheels
11.Sideways battery charger for rapid charging operation
12.Low cost solution for moving pallets
13.Great for smaller warehouses or retail floors
14.Moves pallets in tight locations
15.For uses where pollution or noise are not allowed


Parameter
 
  UNIT TYPE
CDD1016-S CDD1025/1029-S CDD1216-S CDD1225/1229-S CDD1516-S CDD1525-S
Parameters Capacity kg 1000 1500 2000
Load Center mm 550
Top Load Capacity kg 1000 1000/800/600 1200 1500/1200/900 1800
Lifting height of door frame mm 1600 2500/2900/3300 1600 1600 1600 1600
Height of fork when dropping mm 90
Turning Radius mm 1315
Size Length mm 1725
Width mm 840
Static height mm 1975 1850/2050/2250 1975 1850/2050/2250 1975 1850
Lifting Door Frame Height mm 1975 3120/3520/3920 1975 3120/3520/3920 1975 3120
Standard Fork Size 1070*160*70
Outside Fork Width 600mm
Inside Fork Width mm 280mm
Main Features Lifting speed (full/empty load) Mm/s 80/130
Dropping speed (full/empty load) Mm/s 110/90
  Braking Mode Foot Brake
Wheel Front Wheel mm 80*70(nylon)
Rear Wheel mm 180*50(nylon)
 
Motor Lifting Motor kw 3.0
Battery v/AH 12V/150AH
Weight KG 300 320 330 350

Factory Introduction

Jiangsu Zhongyan Forklift Manufacturing Co., Ltd was established in 1997, covering an area of over 21800 square meters, which is high-tech environmentally friendly enterprise specialized in research, production and marketing. 

We adhere to the operation philosophy of "Quality Services, Technology Innovation, Integrity Management and Lenient towards Others "and take the advantage of leading technology, sophisticated equipment and complete testing measures to professionally study and manufacture environment friendly and high intelligent reach forklift truck, electric pallet truck etc.

We attach importance to institutionalized and standardized construction, and established such regulations as pre-delivery inspection, product recall and product exchange/compensation for defect products. We can design and customize the needed products according to the practical usage situation and customers' requirements. For more than 20 years, Zhongyan gained high reputation among customers from all over the world with its high quality and sound after-sale services.

1.5 Ton Electric Hydraulic Used Electric Pallet Stacker, Forklift, Hand Truck with



Package

1.5 Ton Electric Hydraulic Used Electric Pallet Stacker, Forklift, Hand Truck with

Warranty

One year warranty and the battery is 6 months warranty













 

Matt Vinyl Wrap

Matte vinyl wrap is a type of vinyl material that has a non-glossy, flat finish. It is commonly used to wrap vehicles, such as cars, motorcycles, and boats, to change their appearance and protect the original paintwork. Matte vinyl wrap gives a sleek, modern look to the vehicle and can be customized with various colors and designs. It is a popular alternative to traditional glossy vinyl wraps and offers a unique aesthetic appeal.

Installing matte vinyl wrap can be a bit tricky, but with the right tools and techniques, you can achieve a professional-looking finish. Here's a step-by-step guide on how to install matte vinyl wrap:

1. Gather your materials: You will need matte vinyl wrap, a squeegee, a heat gun or hairdryer, a sharp utility knife, rubbing alcohol or a vinyl wrap cleaner, and a microfiber cloth.

2. Prepare the surface: Clean the surface thoroughly with rubbing alcohol or a vinyl wrap cleaner to remove any dirt, grease, or wax. Use a microfiber cloth to ensure a clean and dry surface.

3. Measure and cut the vinyl wrap: Measure the area you want to wrap and cut the vinyl wrap slightly larger than the area to allow for trimming. Use a sharp utility knife and a straight edge to make clean and precise cuts.

4. Peel off the backing: Carefully peel off a small portion of the backing from the vinyl wrap, exposing the adhesive side. Be careful not to touch the adhesive with your fingers to prevent any oils or dirt from transferring onto the wrap.

5. Apply the vinyl wrap: Align the exposed adhesive side of the vinyl wrap with the edge of the surface you are wrapping. Slowly press down the vinyl wrap onto the surface, using a squeegee to smooth out any air bubbles or wrinkles. Work from one edge to the other, applying even pressure.

6. Use heat to stretch and conform the wrap: Use a heat gun or hairdryer to warm up the vinyl wrap as you go. This will make the wrap more pliable and easier to stretch and conform to the contours of the surface. Be careful not to overheat the vinyl, as it can cause damage.

7. Trim the excess vinyl: Once the vinyl wrap is applied, use a sharp utility knife to trim off the excess vinyl. Be careful not to cut into the surface underneath. Use the squeegee to press down and smooth out the edges.

8. Heat and reapply if necessary: If you encounter any air bubbles or wrinkles, use the heat gun or hairdryer to warm up the vinyl wrap and reapply it, smoothing out any imperfections.

9. Final touches: Once the vinyl wrap is applied and trimmed, use the heat gun or hairdryer to heat up the edges and corners, and use the squeegee to press them down firmly for a secure and clean finish.

10. Allow time to cure: Give the vinyl wrap some time to cure and adhere properly. Avoid washing or exposing the wrap to extreme temperatures for at least 24-48 hours.

Remember, practice makes perfect, so don't be discouraged if your first attempt is not perfect. Take your time, be patient, and follow these steps carefully to achieve a professional-looking matte vinyl wrap installation.

Satin Vinyl Wrap,Satin Car Wrap,Matte Wrap,Ultimate Flat,ceramic car vinyl

Guangzhou Fuyulai Technology Co.,Ltd , https://www.fylcarstickers.com